Re: Farmall M JD #5 Sickle Bar?

Posted by Hayfarmer on May 12, 2007 at 07:56:16 from (66.243.234.207):

In Reply to: Farmall M JD #5 Sickle Bar? posted by Clarkbug on May 12, 2007 at 06:08:25:

As mentioned many of these #5s were used with Hs and Ms, in fact JD supplied Mounts for most tractors. If you can find an operator's manuel for the #5 (in the old ones this was a parts book also) it would show the mounts for the M. I used a #8 with the quick tatch brackets you mention on my SMTA. I had a mounting bracket from a JD 420 or 430 and fastened it to my drawbar. You have to tailor the PTO length to match your tractor. As mentioned if you find one with the flat mount it will bold right to your swinging drawbar supports.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]