400 Throttle Lever

Posted by super991/2 on May 11, 2007 at 19:43:13 from (207.144.199.120):

Got my corn planted and started spraying it with the 400. I have to hold the throttle lever down, when I let go of it, it comes up to about 1/2 throttle. I put a new washer on it, the old one was wore. The notches it sets in look to have good square edges. It's a bear trying to hold lever down and turn around and set pressure. Could the return spring be too tight? Is there a special washer from IH that has to be used for this? I just grabbed a new one from bolt bin. Any ideas? Thanks, Chris

Replies:

• Re: 400 Throttle Lever Jossette 16:57:38 05/12/07 (0)
• Re: 400 Throttle Lever janicholson 05:42:19 05/12/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]