Re: SUper H brakes.

Posted by the tractor vet on May 03, 2007 at 08:31:19 from (76.212.224.60):

In Reply to: SUper H brakes. posted by GordoSD on May 03, 2007 at 08:09:45:

Gordo try this , take the drum off place all the pices and parts in the drum lay a stright edge across the drum and massure the clearance between the edge and the disc if ya have more then and 1/8th of and inch then machine i said machine the edge of the drum off so everything is flat from the drum face to the mounting edge of the drum . What i Think is happening here is that you have to much clearance and have the adjusters pulled out tofar and are at the end of the ramps on the balls and this will not give the braking force . Also remove the never seeze as this will collect brake dust and cause the disc to not slide on the splines.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]