Re: 140 farmall what type fluids to use

Posted by Hugh MacKay on April 17, 2007 at 03:23:13 from (216.208.58.116):

In Reply to: 140 farmall what type fluids to use posted by keith stromberg on April 16, 2007 at 20:48:00:

Keith: I read your other thread and you best order the manuals PDQ. The original IH operators manual gives good everyday operation advice. For service manuals I have both the IT manual plus the IH Blue Ribbon service manual. Those are all available at Binder Books as well as from other online manual sellers.

In the meantime cap on top of governor is crank case fill hole. Hydraulic fill is on left side of touch control unit. Hyrdaulic is Hy tran or equivilant. Engine crankcase is any good grade motor oil. Steering box, transmission and each final drive is gear oil.

Get the operators manual and pay particular attention to fluid levels, distributor drive gears and greasing. For instance, Hydraulic should only be filled when hydraulic rockshafts are in rear position, over filling will occur if rockshafts are forward.

By the way Jim is right your steering box needs a major overhaul.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]