Re: 140 farmall what type fluids to use

Posted by georgeky on April 16, 2007 at 21:09:25 from (64.12.117.8):

In Reply to: 140 farmall what type fluids to use posted by keith stromberg on April 16, 2007 at 20:48:00:

The resivoir is not in front of the hydraulic pump. You add Hy Tran or straight weight non detergent motor oil in the box with the lift arms on it. On the left side of the lift unit is a bung that is removed to add hydraulic oil. Fill to within a half inch of top. I would recommend you get an IT manual. The one you need is manual number IH 201. They are not perfect, but will have most info you need in it. Any good motor oil is OK, I use straight SAE 30 year round in all my Farmalls. The rear end should have at least a good 90 weight gear oil in it. BTW you can order manuals from this site, look to left of page and click on tractor manuals. They are also available at TSC and other farm supply stores or Case IH.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]