Re: getting a W-6 (248ci.) to idle down.

Posted by farmallhal on March 04, 2007 at 14:18:21 from (64.85.221.207):

In Reply to: getting a W-6 (248ci.) to idle down. posted by Charles McNelly III on March 04, 2007 at 12:57:10:

Charles, I had the same exact problem on my M when I first got it. I just opened up the governor and adjusted the two adjustment screws, one is the idle stop screw (top one) and the speed adjusting screw (bottom one). I used the detailed directions in the service manual for my adjustments. Been running correctly ever since. There is another adjustment that can be done inside the slanted cover at the front of the carb throttle shaft which might be your problem. There are some other adjustments noted if for some reason you can't get it adjusted with those adjustments. If you don't have a manual maybe someone will jump in here with their solutions. Good luck, Hal.

Replies:

• Re: getting a W-6 (248ci.) to idle down. Charles McNelly III 16:22:04 03/05/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]