Re: Help idenitfying tranny gears...

Posted by Janicholson on February 22, 2007 at 13:33:24 from (199.17.6.122):

In Reply to: Re: Help idenitfying tranny gears... posted by JayWalt on February 22, 2007 at 12:36:23:

Do not fret, these are straight cut sliding gear transmissions. They will grind a little no matter what you do. Ignore it. It is no consequence. The action of the pilot bearing, inertial of the clutch disk, and motion of the tractor cause inevitable minor raking of a few teeth to get it ino gear. Do not avoid 4th it is not broken until it jumps out of gear, or makes loud noise. Almost all have a few nicks in the teeth. Don't worry, be happy. JimN

Replies:

• Re: Help idenitfying tranny gears... JayWalt 14:02:28 02/22/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]