Re: IH300 Utility hydraulics

Posted by Jack Crifasi on February 20, 2007 at 15:40:10 from (67.142.130.44):

In Reply to: Re: IH300 Utility hydraulics posted by Hugh MacKay on February 20, 2007 at 03:19:09:

I bought the CaseIH Hytran hydraulic fluid and put in about 1/2 gallon, to full mark if dip stick is screwed in til seated. No hyd action at all on my front bucket or three point cylinder, seems like air is in the line and pump. Before I lost Hyd power this AM, the movement was choppy then nothing. I think I need to prime the Hyd pump somehow. Any ideas? The IH dealer mentioned the strainer might be plugging up, but on the 300U it is a pain to get to it (drain and remove the reservoir box first).
Can you guys give me any help?

Replies:

• Re: IH300 Utility hydraulics Hugh MacKay 16:23:10 02/20/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]