Re: Head on an H are they the same

Posted by The Red on June 16, 2001 at 05:38:27 from (12.75.221.73):

In Reply to: Head on an H are they the same posted by Charles Myers on June 16, 2001 at 05:17:42:

Charles the heads will interchange. However the compression might be different. The part number is clearly stamped on top of the head, in the middle near the center valve stems and springs. You probably have one of the following 3 heads.

Part 65288DD kerosene head
Part 65301DA gasoline head
Part 65302DA distillate head.

The gasoline head will have the highest compression at around 5.9 to 1. The other two heads are in the low 5s or upper 4s. I noticed Old Rusty H has a distillate head for SN 501 to 106907 but it was bolted to a 1953 block. Hmmmmmmmmmmm.

Follow Ups:

• Re: Re: Head on an H are they the same The Red. Ooops! 05:45:56 06/16/01 (3)
  • Re: Re: Re: Head on an H are they the same Charles Myers 06:13:00 06/16/01 (2)
    • Re: Re: Re: Re: Head on an H are they the same The Red 06:24:17 06/16/01 (1)
      • Re: Re: Re: Re: Re: Head on an H are they the same jakee 19:32:25 06/16/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Head on an H are they the same Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]