Re: Re: Re: Re: Re: Head on an H are they the same

Posted by jakee on June 16, 2001 at 19:32:25 from (152.163.213.188):

In Reply to: Re: Re: Re: Re: Head on an H are they the same posted by The Red on June 16, 2001 at 06:24:17:

all H-300-350 heads will interchange.watch out that if you use a 300-350 LP head the pistons will have to be almost flat tops,and a 300-350 lp head will give you about 8.1 for compresion,and the 300-350 LP fas no quench area in the combustion area-very easy to see,the 300-350 LP head i only cut around .030, the old h heads i cut around .180,also some times wen you cut that motch you have to make shims for under the rocker arm stands to get your valve lash right.also wen you raise the compresion ratio you have to bring the total timing to stay away from spark nock.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Re: Re: Head on an H are they the same Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]