Re: International U6

Posted by Wayne on February 13, 2001 at 14:58:27 from (205.188.200.36):

In Reply to: International U6 posted by Chris on February 12, 2001 at 16:38:07:

Hi Chris
Just went out and checked the engine in my 46 "M". Part of the cast number on the right side of the engine has been ground off. I have a hand stamped 6722 number in the ground off area with a cast DH following it. I got to looking at the engine after I discovered that the normal serial number was blank when I bought this orginal tractor several months ago. I was told that this was the industral version of the "M" engine called a "U5" engine. It has a dip stick and a boss under the carb for the installation of a fuel pump. I have a plate covering the hole for the pump and I understand that the "M" engine cam has a lobe to operate the pump. I have discovered one catalog company that list a book for the "U5" engine. I haven't put the tractor on a dyno, yet. I have a nice clean running tractor that needs a lot of other help. Wayne

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: International U6 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]