Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

Re: Westendorf Loader Opinions?

Welcome Guest, Log in or Register
Author 
John Hoberg

07-28-2008 21:35:26




Report to Moderator

[quote:9eddc016d3]

I need to replace the seals on my WL-40, both lift and bucket hydraulics. However, the snap rings are rusted in and thus I am unable to compress them with a typical snap ring pliers. Additionally, one of the eyes on a snap ring is broken. Any suggestions?

Is it possible to drill out or cut out the Gland inside the cylinder and replace it and the seals?

thanks[/quote:9eddc016d3]

[Log in to Reply]   [No Email]
Rob Basham

07-29-2008 18:17:37




Report to Moderator
 Re: Westendorf Loader Opinions? in reply to John Hoberg, 07-28-2008 21:35:26  
I dont know where you are located,but here in Mo there is a place that'll rebuild such things for you very reasonably.ACME Hydraulics in Kansas City,Mo.They resealed and inspected my Hydraulic Pump on my 400 farmall for 75 bucks.The seals on my loader rams cost 5 bucks there



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy