Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

HELP Ford County Super six

Welcome Guest, Log in or Register
Author 
Carl Werner

05-02-2008 08:38:46




Report to Moderator

I am haveing a hard time trying to find anything about my ford county super six! I just pulled it out of the fence line. i want to get it running. the motors good. all i want is some info (price, hp, ect.). everybody I have Talked to says They don't even konw what it is. Help




[Log in to Reply]   [No Email]
Muir-Hill

05-04-2008 15:10:07




Report to Moderator
 Re: HELP Ford County Super six in reply to Carl Werner, 05-02-2008 08:38:46  
[quote="Carl Werner"](quoted from post at 08:38:46 05/02/08) I am haveing a hard time trying to find anything about my ford county super six! I just pulled it out of the fence line. i want to get it running. the motors good. all i want is some info (price, hp, ect.). everybody I have Talk

ed to

hi carl
Your county super six could be the original supersix ,based on the major or on some of the later ones e.g. 954 1004 or 1124

On the later models ,the model numbers were pretty clear on the hood
Power range from 95 to 112 h.p.

[Log in to Reply]  [No Email]
Bob N.Y.

05-02-2008 09:14:54




Report to Moderator
 Re: HELP Ford County Super six in reply to Carl Werner, 05-02-2008 08:38:46  
The version of the County Super Six that was sold in the US used the 401 ci engine from the 8000 hooked to a 5000 trans. and rear end. They were assembled by the County Tractor Works in England. The pto hp was in the 105 to 110 range.



[Log in to Reply]  [No Email]
RodInNS

05-03-2008 09:29:15




Report to Moderator
 Re: HELP Ford County Super six in reply to Bob N.Y., 05-02-2008 09:14:54  
I would say the vast majority of them actually had the 2700 series engine fitted to the 5000 back end....
I'm not right up on County stuff since all I know is what I've read in a few different books, but I do know that they started with the Major chassis, then went to the 5000 chassis and the last were built up on 5600-7600 chassis'. I don't think they fitted the Basildon engines until the late 70's when the Dorset engines were fading from popularity, so there were a lot of years of 5000 based tractors with 2714 or 2715 engines...
They well proved what that drive line could stand consideringthey were driving 40 horse more through it than Ford intended. Otherwise they take about 40 acres to turn with those big front wheels, but they were considered pretty tough I think. There were a few of them around here, mostly used in the woods.
Dunno where on earth you'd get front axle or related parts for them any more. County bit the biscuit 25 years ago. The engines are not easy to source parts for either.

Rod

[Log in to Reply]  [No Email]
Fordfarmer

05-02-2008 14:41:04




Report to Moderator
 Re: HELP Ford County Super six in reply to Bob N.Y., 05-02-2008 09:14:54  
That's the later one... earlier one was based on the Major or Super Major, with Ford's Dagenham 6 in it.



[Log in to Reply]  [No Email]
Carl Werner

05-02-2008 10:38:14




Report to Moderator
 Re: HELP Ford County Super six in reply to Bob N.Y., 05-02-2008 09:14:54  
Whats the resale value is it worth anything



[Log in to Reply]  [No Email]
Fordfarmer

05-02-2008 14:43:01




Report to Moderator
 Re: HELP Ford County Super six in reply to Carl Werner, 05-02-2008 10:38:14  
depends on condition... some parts are not available, except used, as County is out of business. Should be some demand, if complete and working...



[Log in to Reply]  [No Email]
Carl Werner

05-02-2008 16:30:17




Report to Moderator
 Re: HELP Ford County Super six in reply to Fordfarmer, 05-02-2008 14:43:01  
well its complete but not working



[Log in to Reply]  [No Email]
Fordfarmer

05-02-2008 09:13:28




Report to Moderator
 Re: HELP Ford County Super six in reply to Carl Werner, 05-02-2008 08:38:46  
I know a --little-- bit about them, but if you ask on the Ford or Fordson forums, htey can fill you in...



[Log in to Reply]  [No Email]
Powerpack

05-02-2008 08:47:05




Report to Moderator
 Re: HELP Ford County Super six in reply to Carl Werner, 05-02-2008 08:38:46  
Dont know if you can get this magazine in the states. Link The Super Six is based around Super Major back end with I think a Ford 6 cylinder engine



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy