TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

D8H dimensions

Welcome Guest, Log in or Register

Author

Victor Fuguet

01-30-2008 06:36:37

Report to Moderator

I need to ship a D8H 46A30469 and need weight and dimensions . Can anybody help?

[Log in to Reply] [No Email]

Old Magnet

01-30-2008 08:42:57

Report to Moderator

Re: D8H dimensions in reply to Victor Fuguet, 01-30-2008 06:36:37

I show the 46A bare weight at 48,210 lbs
9 ft. - 1 in. width

[Log in to Reply] [No Email]

hectorgemme

01-30-2008 07:52:46

Report to Moderator

Re: D8H dimensions in reply to Victor Fuguet, 01-30-2008 06:36:37

the 46a weight 25tons. + hydrolic systeme

[Log in to Reply] [No Email]

Billy NY

01-30-2008 07:09:29

Report to Moderator

Re: D8H dimensions in reply to Victor Fuguet, 01-30-2008 06:36:37

Bare tractor might be 36,000 lbs or 18 ton + or - add belly pans, blade, cable control unit and other equipment like a ripper, accumulated dirt etc., you could easily be well over 40,000 lbs/20 ton.

78" from center of track to center of track + half the width of whatever size track shoe is on it, each side would give you bare tractor width, so if it has 22" pads, add 12" each side, 100" wide. I've hauled plenty of D8K's and outside of track to outside of track was not overwidth on the deck, never used outriggers and planks when hauling them, maybe actual width is 96", just the blade push arms and blade itself is what makes them overwidth.

Height will depend on what kind of R.O.P.S. or weather canopy if any is installed at the operators station, and make sure to tape up the exhaust rain flap so as not to spin the turbo while in transit.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy