Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Trailer equipment overhang

Welcome Guest, Log in or Register
Author 
37 chief

12-28-2007 19:27:28




Report to Moderator

I found a 10 ft mower for a good price (500) Can I haul this on my equipment trailer which is 8ft. 6 in. width across the fenders. I will have about 9 in overhang on each side. Is this too much?, or is nothing to be over the fenders. Thanks for any info. Stan




[Log in to Reply]   [No Email]
wyod

12-30-2007 12:05:07




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
Hey Stan,
Local trailer police told me that if I'm driving my truck/trailer for farm use and have an oversized load of less than 12' wide to hang the flags and oversize load placards and git'r done. Might check with your local authorities first. D



[Log in to Reply]  [No Email]
jd720ga

12-30-2007 11:52:10




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
Why not mount it at an angle making the mower the hypotenuse of a triangle. I estimate you would only have to raise one side around 5 feet or so.



[Log in to Reply]  [No Email]
RodInNS

12-29-2007 14:39:33




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
Check with Cal DOT...
Here, if we have a farm plated truck, we can tow ANYTHING up to 16' in width provided it has an SMV emblem on the back. Trailers are not required to be licensed or inspected. Just throw the sign on, hitch it and go.
The bears don't like that too much, but that's the way it is. A buddy of mine got stopped a few weeks ago for not having licence or lights on his gooseneck trailer. He got held on the road for a while as barney needed to make some calls and indeed confirm that he was wrong to have stopped my friend... Farm plates are a basic licence to get away with anything here. I towed a haybine behind my truck a couple years ago with a discbine loaded on the deck. Overall width was in the 16' range that.... night. I just flagged the outer corners and went. All 100 series highway too.

Rod

[Log in to Reply]  [No Email]
Walt Davies

12-29-2007 12:45:42




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
Width Exemptions and Limitations

36600. (a) The limitations as to width as set forth in Chapter 2 (commencing with Section 35100) of Division 15 do not apply to implements of husbandry incidentally operated, transported, towed, or otherwise moved over a highway.

(b) Notwithstanding subdivision (a), when an implement of husbandry is transported or moved over a highway which is a part of the National System of Interstate and Defense Highways (as referred to in Section 108 of the Federal-aid Highway Act of 1956) as a load on another vehicle, if the load exceeds 102 inches in width, the vehicle and load shall not be operated for a distance in excess of 25 miles from the point of origin of the trip. The operator of the transporting vehicle shall be a farmer or a person regularly employed by a farmer or farm corporation, and the operator transporting the load shall have in his or her immediate possession a writing signed by the farmer or farm corporation agent which states the origin and destination of the trip.

(c) Notwithstanding subdivision (a), when an implement of husbandry is transported or moved over any other highway as a load on another vehicle, if the load exceeds 120 inches in width, the vehicle and load shall not be operated for a distance in excess of 25 miles from the point of origin of the trip. The operator of the transporting vehicle shall be a farmer or a person employed by a farmer or farm corporation, and the operator transporting the load shall have in his or her immediate possession a writing signed by the farmer or farm corporation agent which states the origin and destination of the trip.
Amended Ch. 103, Stats. 1988. Effective May 11, 1988.

Walt

[Log in to Reply]  [No Email]
trucker40

12-29-2007 12:13:20




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
I dont think you can move a oversize load at night.If you do ,you better have lights on whatever sticks out the most.Would you want to meet a oversize load,at night,in your car,with your family in the car,that sticks out past the clearance lights?If you meet a cop like that,and he doesnt like it,it doesnt even matter what the law says,you are probly gonna stop,and pay a fine too maybe,especially if you argue.You at least need flags on it in daylight.Anything over 102 inches you need a permit,I dont know about California.
You maybe could haul it sideways.There is a way you could haul it,but if you got caught,hit something,even if somebody ran into you,or you go through a town and a Highway Patrol sees you and has nothing better to do,he will probly nail you for it.Put it on the trailer where its not past the clearance lights to the traffic side,but hanging over the other side.You also need to put the heavy side toward the traffic side.Then look for a gas station that sells those goober teeth.Put about six chains and boomers on it,put the goober teeth in,if you get stopped,come up with some long story,and if you act farmer enough you might get away with it,as long as you arent holding up traffic or running over signs,people,cars and stuff on the right side,and stay in the right lane,and the trailer isnt leaning to either side,lights working,good tires,you are using turn signals and stuff.Or you could make some L brackets out of heavy angle iron,2 on front,2 on back and stand it on edge to where it dont stick out of the sides and if its less than 13 ft 6 in tall,haul away.I would stay away from all scales,and even as many towns as I could avoid them,Day,Night,whenever you drive a truck.Ive found it costs less to operate a truck when you stay away from the cops.Be your own cop,if you wouldnt want your family meeting you in a car coming at you in the truck,nobody else will want their family meeting you either,and a cop doing his job will stop you.He might stop you anyway to see what the heck you are doing on that road(I have had that happen)unless its going right by your house,say theres a tractor setting up there somewhere you want to look at and if your lights work,you have good tires,and are farmer enough,he probly will let you go.

[Log in to Reply]  [No Email]
chuck craig in sunny suca

12-29-2007 10:23:52




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
Dont even think about it!! I have lived in this state for over 50 years and although they are very strict they will be fair if you try to comply. Where due you live[ the area in socal] I trucked in cal and did a lot of scale dodging and ran legal n so on. you can contact me as my email is always open 30 CC



[Log in to Reply]  [No Email]
37 chief

12-29-2007 17:24:31




Report to Moderator
 Re: Trailer equipment overhang in reply to chuck craig in sunny suca, 12-29-2007 10:23:52  
I live 30 mi north of San Diego. Stan



[Log in to Reply]  [No Email]
Leland

12-29-2007 07:33:42




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
check your state laws in some states farm equip is exempt on width laws , bacause in ILL they passed a law stating that farmers are exempt from needing permits to move there own equip .



[Log in to Reply]  [No Email]
john in la

12-29-2007 06:57:59




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
If you can not turn it side ways to make it fit on the trailer you will need a permit.

Legal width is 8'6". Anything over that needs a permit; 12x12 red flags on each side; and a Oversize Size sign front and rear.
While Farm stuff is often exempt it would only be exempt if hooked to a tractor being driven down the road. Hauling it on a trailer makes it NOT exempt.
If you were to get over 12' wide the rules change and a escort is needed.
The permit will give you the route you need to take.
Calif is strict so get it right and stay away from Banning on I 10.

[Log in to Reply]  [No Email]
johndeereman

12-29-2007 06:57:41




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
talk to the monster truck guys you cant haul anything over 8 feet wide. i always wondered what was legal i have my wheels all the way in on my dc and it hangs over a couple inches on each side of the trailer but it dont go past the wheels of the trailer is this legal?



[Log in to Reply]  [No Email]
john in la

12-29-2007 07:00:54




Report to Moderator
 Re: Trailer equipment overhang in reply to johndeereman, 12-29-2007 06:57:41  
8'6" is legal on all federal roads. Some states only allow 8' on state or back roads.

So yes..... .. Pulling a empty 102" wide trailer on some state roads is against the law.



[Log in to Reply]  [No Email]
bradley martin

12-29-2007 04:09:44




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
Buy the oversize permit,,,or be prepared to pay dearly if you are caught, And if, heaven forbid, you happen to clip another vehicle or person trying to sneak it around you will find that you don't have enough insurance!!!



[Log in to Reply]  [No Email]
soundguy

12-28-2007 21:40:06




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
why not haul the mower sideways?????

I hauled my 10' howse 3pt mower on my 16' wood deck car hauler trailer.. it is 7' exactly, between the fenders.

remember.. a 10' mower is 10'ish feet wide.. but not much more than 5' long.. think of it as 2-5' mowers side by side... if it is a dual spindle mower.. etc.

soundguy



[Log in to Reply]  [No Email]
crackerhead

12-28-2007 20:23:20




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
Dont try this in Tennessee, Just payed fine of 178.00 for one and one half inches over width on a disc harrow for being in the state of Tenn . without an overwidth permit . 25.00 fine for not having the permit ,the remainder court cost, said I could come back to court if I wanted . Damn high priced Judges in Coffee Co Tenn,[Manchester scales]



[Log in to Reply]  [No Email]
Leland

12-29-2007 07:36:25




Report to Moderator
 Re: Trailer equipment overhang in reply to crackerhead, 12-28-2007 20:23:20  
your first mistake was not going around those scales ,those scales are nothing but money makers for that state .it's a wonder they did not shut you down and have one of the former cops service truck replace 1000.00 worth of unneeded parts on your rig .



[Log in to Reply]  [No Email]
Randy-IA

12-28-2007 20:03:03




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
You should sign it with oversize or wideload signs and flag the outermost parts of the load . It might not be the law but it's a good idea . If you have to move at night , lights on the outer parts of the load with red pointing to the rear and amber pointing forward are a good idea even if not the law . You are allowed three inches of overhang on the sides of a trailer ( that's just the slack they might allow you for safety devices IE; tie downs ) so that still leaves you with six inches of load outside that limit assuming the load is perfectly positioned on the trailer . The types of roads you travel on should also influence your decisions . HTH ...Randy

[Log in to Reply]  [No Email]
Randy-IA

12-28-2007 20:01:59




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
You should sign it with oversize or wideload signs and flag the outermost parts of the load . It might not be the law but it's a good idea . If you have to move at night , lights on the outer parts of the load with red pointing to the rear and amber pointing forward are a good idea even if not the law . You are allowed three inches of overhang on the sides of a trailer ( that's just the slack they might allow you for safety devices IE; tie downs ) so that still leaves you with six inches of load outside that limit assuming the load is perfectly positioned on the trailer . The types of roads you travel on should also influence your decisions . HTH ...Randy

[Log in to Reply]  [No Email]
Trkr

12-28-2007 19:57:37




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
Depends on the state,some let you haul oversize ag equipment without a permit,some don't.



[Log in to Reply]  [No Email]
Armand Tatro

12-28-2007 19:33:18




Report to Moderator
 Re: Trailer equipment overhang in reply to 37 chief, 12-28-2007 19:27:28  
What state or states will you be going thru? Armand



[Log in to Reply]  [No Email]
37 chief

12-28-2007 22:01:45




Report to Moderator
 Re: Trailer equipment overhang in reply to Armand Tatro, 12-28-2007 19:33:18  
California only. Stan



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy