Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Can we do it

Welcome Guest, Log in or Register
Author 
old

10-29-2007 18:45:41




Report to Moderator

Friend asked me today if we could take his 3 point PTO drive post hole auger and turn it in to a hyd drive type. How big a hyd. motor would we need and how many GPM would we need. He wants to hook it up to his Swinger 200 which is sort of like a bob cat but its an articulated loader but about the same size as a bob cat/skid steer.
Thanks

[Log in to Reply]   [No Email]
Oldmax

10-30-2007 04:59:27




Report to Moderator
 Re: Can we do it in reply to old, 10-29-2007 18:45:41  
I liked that web page . Gevs me some good ideas.



[Log in to Reply]  [No Email]
Dave in Tx

10-30-2007 03:23:17




Report to Moderator
 Re: Can we do it in reply to old, 10-29-2007 18:45:41  
Rich, I may have some wheel motors that will do what you want. E-mail is open. Does his skid steer have the aux. lines already on it?? Most of them have enough GPM. How big of auger you wanting to run?

Dave



[Log in to Reply]  [No Email]
TomTex

10-29-2007 19:35:30




Report to Moderator
 Re: Can we do it in reply to old, 10-29-2007 18:45:41  
You can buy a Beltec which works like that. Will dig anything - - rock, cement, hard baked clay, etc. Tom



[Log in to Reply]  [No Email]
Noah W

10-29-2007 18:49:19




Report to Moderator
 Re: Can we do it in reply to old, 10-29-2007 18:45:41  
Didn't look to far into it, but here is an examplr of what you want. Might give you some ideas.

Link



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy