TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

update on the 301 a deere

Welcome Guest, Log in or Register

Author

glennster

03-01-2007 10:31:49

Report to Moderator

thats guys for the info on the hydraulic fluid, i got 15 gallons of hy guard on the floor, new hydraulic filter and an oil filter. finaly got her running. coil was bad, somebody put a 6v coil on it, no resistor, zoomed over to napa, got a gm 12v coil and a chrysler b-body ballast resistor, running pretty good, front hydraulic pump is rattling, i.m thinking it may be going bad, are they rebuildable or just replace, heres some photos. oh yeah, just put new tires on the front too!!!!

[Log in to Reply] [No Email]

DLM

03-01-2007 17:47:38

Report to Moderator

Re: update on the 301 a deere in reply to glennster, 03-01-2007 10:31:49

I think the screen comes out the right side should be a plug on the left side also take it out then you can work the screen out just trash has it lock up on out side of screen Don

[Log in to Reply] [No Email]

Jerry Cent. Mi.

03-01-2007 15:23:55

Report to Moderator

Re: update on the 301 a deere in reply to glennster, 03-01-2007 10:31:49

I don't understand. If its 12 volts a ballast resister reduces the voltage to 6 volts and your now using a 12 volt coil. It should produce a reduced spark.

[Log in to Reply] [No Email]

Butcher

03-01-2007 12:33:09

Report to Moderator

Re: update on the 301 a deere in reply to glennster, 03-01-2007 10:31:49

I had the pump rebuilt on a 302A diesil last year. Parts were kind of pricey from mother Deere. Dont know were eles to get parts though.

[Log in to Reply] [No Email]

glennster

03-01-2007 10:35:35

Report to Moderator

Re: update on the 301 a deere in reply to glennster, 03-01-2007 10:31:49

heres one more photo shows the ballast resistor

[Log in to Reply] [No Email]

Glen in TX

03-01-2007 12:14:22

Report to Moderator

Re: update on the 301 a deere in reply to glennster, 03-01-2007 10:35:35

Looks good green and yellow like that instead of that ugly yellow.

[Log in to Reply] [No Email]

RustyFarmall

03-01-2007 10:53:38

Report to Moderator

Re: update on the 301 a deere in reply to glennster, 03-01-2007 10:35:35

Might be just the coupler on the front pump. Those do get wear in them, and then it will rattle.

[Log in to Reply] [No Email]

glennster

03-01-2007 11:02:36

Report to Moderator

Re: update on the 301 a deere in reply to RustyFarmall, 03-01-2007 10:53:38

i'll check that coupler. thanks for the tip. i'm kinda lost workin on the green.

[Log in to Reply] [No Email]

RustyFarmall

03-01-2007 11:06:34

Report to Moderator

Re: update on the 301 a deere in reply to glennster, 03-01-2007 11:02:36

I wrenched for a Deere dealer back in the early '70s. I'm kinda lost after that.

[Log in to Reply] [No Email]

glennster

03-01-2007 12:25:53

Report to Moderator

Re: update on the 301 a deere in reply to RustyFarmall, 03-01-2007 11:06:34

rusty, i have all the hydraulic fluid drained, its real milky, i pulled the side plug out to remove the screen in the rear by the hydraulic filter, the screen seems to be stuck in there, is there something that holds it in or does it just pop out? i tried to order the manual from deere, but its discontinued.

[Log in to Reply] [No Email]

RustyFarmall

03-01-2007 14:21:31

Report to Moderator

Re: update on the 301 a deere in reply to glennster, 03-01-2007 12:25:53

I guess I can't help you on that, my mind is coming up blank.

[Log in to Reply] [No Email]

glennster

03-01-2007 14:43:02

Report to Moderator

Re: update on the 301 a deere in reply to RustyFarmall, 03-01-2007 14:21:31

thanks for your help, i'll post over on the deere forum and see how to get that rascal out. was thinkin bout the slide hammer.....nah....bad idea!!!

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy