TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

Diesel Smoke For Raleigh

Welcome Guest, Log in or Register

Author

Allan In NE

02-15-2007 08:34:24

Report to Moderator

Just some more pictures from a different tractor, Raleigh. This engine is brand spankin' new too.

Oh, and another thing just for what it's worth? When they get to pullin' hard, you'll see the blowby. Promise. :>)

Allan

third party image

[Log in to Reply] [No Email]

Raleigh..

02-15-2007 14:20:23

Report to Moderator

Re: Diesel Smoke For Raleigh in reply to Allan In NE, 02-15-2007 08:34:24

Again this is the kind of Smoke I see on mine. If this is no problem then it does not bother me. However I did see one that did not smoke, but it was a late mode 4020. I passed on it but maybe I should NOT have....

[Log in to Reply] [No Email]

IaGary

02-15-2007 16:31:48

Report to Moderator

Re: Diesel Smoke For Raleigh in reply to Raleigh.., 02-15-2007 14:20:23

Raleigh please don't worry so much your gonna have a heart attack.

I have tractors that have had blowby since they were new. They have over 6000 hours now and have not been overhauled.

They use very little oil also.

Would they put that blow by pipe on there if it weren't to release blow by.

If were a steady stream of oil coming out I might get a little worried.

Gary

[Log in to Reply] [No Email]

Raleigh boulware

02-15-2007 14:18:29

Report to Moderator

Re: Diesel Smoke For Raleigh in reply to Allan In NE, 02-15-2007 08:34:24

Now you say they could have alot of Blow by under a load????? HHHHH mmmm I don't know I'm a rookie but I might just chalenge you on that one if I may LOL...
I have seen three tractor running on a dyno two Diesels and one gasser...The gasser made on 70 HP but it had the same almost no blow by when just idleing.

Then the late model 1971 4020 with the littel slight leak between the head and the block had NO Blow by either on the dyno. Like I said it did have a small drip coming between the haed and block, which I later found out later, this was NOT a problem.

Then the one I have now Pulled REALLY hard on the Dyno, Made alot of noise and some black smoke! Made 100 HP on the dyno, it had no blow by either....

I am not sure....how could it have blow by and still be a good motor?

[Log in to Reply] [No Email]

otto stook

02-15-2007 08:52:33

Report to Moderator

Re: Diesel Smoke For Raleigh in reply to Allan In NE, 02-15-2007 08:34:24

for what its worth,,we have 2 4020s and a 4010,,the 4020s one with a blower both smoke when puttering around,,but not much under load,,and have some blow by,,the 4010 dont smoke at idle but is a frieght train under load, and has blow by like crazy,,just went to the neighbors for OH,,leaks antifreeze to crankcase,,and head gasket leaks lots of oil to outside,you can see the stream,,but on a cold day the 4010 will start easier,,go figure,,the one 4020 that I posted about that used 1.5 gallons of oil on the standby generator,,the neighbor came over and plugged the crankcase venilator,,and said give that a try,,he pulled the intake hose and the intake manifold had bunch of oil in it,,Dunno?????

[Log in to Reply] [No Email]

Raleigh boulware

02-15-2007 14:21:55

Report to Moderator

Re: Diesel Smoke For Raleigh in reply to otto stook, 02-15-2007 08:52:33

That 4010 i would invest in an Overhaul kit!

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy