TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

Cost to Rebuild cylinders on a Bobcat?

Welcome Guest, Log in or Register

Author

TucsonAZ

01-15-2007 23:56:40

Report to Moderator

Couple quick questions..

1) How much would it cost in parts and parts/labor to rebuild the two long and two short cylinders (four in all) on a Bobcat 610? I can't figure this to be more then $20 in parts, maybe some O rings and so on..

2) 10 Hoses for the same unit, how much should those run if I were to take the old ones in and have new ones made.. I would like both, the cost of parts and what someplace would charge me..

I'm asking this because a friends brother is returning a favor for me and is telling me he's charging me his cost (he owns the shop) on the rebuild.. I'm being told not a penny more and I want to be fair but I did a lot of work for him free of charge so I would like a good idea what cost might really be so I know how honest of "friends" I'm dealing with..

[Log in to Reply] [No Email]

TucsonAZ

01-16-2007 00:11:21

Report to Moderator

Re: Cost to Rebuild cylinders on a Bobcat? in reply to TucsonAZ, 01-15-2007 23:56:40

I forgot to add, there are 10 hoses, most are about a foot but two are more like 24 inches..

So I guess the question is, how much would it cost a shop (not how much would they charge) to rebuild the four cylinders and make 10 hoses with the fittings..

Thanks a million!

[Log in to Reply] [No Email]

IaGary

01-16-2007 05:02:43

Report to Moderator

Re: Cost to Rebuild cylinders on a Bobcat? in reply to TucsonAZ, 01-16-2007 00:11:21

Those seal kits for the cylinders could run about $20 a piece.

Hose ends and hoses could run $20 a piece also.

$280 for all parts would not be out of line in my estimation.

Gary

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy