Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

656 PTO adjustment

Welcome Guest, Log in or Register
Author 
Midnight

08-02-2006 04:32:53




Report to Moderator

The PTO is starting slip in my 656 when under heavy load like finishing up a bale in my round baler or on the grinder mixer. Is there an adjustment?




[Log in to Reply]   [No Email]
the tractor vet

08-02-2006 07:53:23




Report to Moderator
 Re: 656 PTO adjustment in reply to Midnight, 08-02-2006 04:32:53  
Yes , BUT YA NEED THE SPECIAL TEST FITTING and a hyd. gauge that will handel 600 lbs pressure . Now it may need a clutch pack put in it if it has slipped tomany times as they are not that forgiveing on slipage . They are not that hard to install a clutch pack in but i would recomend having a book to fallow and the test fitting as if ya don't get it wrigth then either ya don't have enough pressure and your back to square one or tomuch and either warp the plates or blow it apart.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy