Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

How to out pull a JD on first pull?

Welcome Guest, Log in or Register
Author 
83Coomer

02-27-2006 14:41:44




Report to Moderator

I have rebuilt the engine to a 4" pistons with a 8060 head, i bought set of tires(75%)tred 14.9 firestone 23 degree, rims 16/38, hubs are cast. i have mounted the tires in close and put in all season gear lube. I have two sets of wheel weights and some suitcase weights for under the back seat. i put on a narrow front. I wondered what are some other things that are important to do to get a good stock pull? any ideas?

[Log in to Reply]   [No Email]
Mike M

02-27-2006 18:53:39




Report to Moderator
 Re: How to out pull a JD on first pull? in reply to 83Coomer, 02-27-2006 14:41:44  
" get a good stock pull"

ROFLMAO !!!!! !!!!! !!!!



[Log in to Reply]  [No Email]
mj

02-27-2006 17:53:33




Report to Moderator
 Re: How to out pull a JD on first pull? in reply to 83Coomer, 02-27-2006 14:41:44  
Are you pulling for actual drawbar pull or percentage of tractor weight?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy