Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

How does a John Deere H Fan Shaft go to gether

Welcome Guest, Log in or Register
Author 
Adam Bailey

02-23-2006 06:34:42




Report to Moderator

I have a 1945 John Deere H and i was taking apart the fan shaft and did not take any pictures! Now i am having a hard time putting the fan shaft back together. Its a different style from what i was told then the early H's. What i would like is if any one has pictures from there tractor to send then to me so i can see how the fan and spring go on. Thanks




[Log in to Reply]   [No Email]
Maark

02-23-2006 13:58:47




Report to Moderator
 Re: How does a John Deere H Fan Shaft go to gether in reply to Adam Bailey, 02-23-2006 06:34:42  
Probably the pulley 1st,the pulley may have a groove cut in it to accept a small o-ring around the shaft, then the spring, a pot metal disk, fiber disk, fan blade, fiber disk, pot metal disk then the keeper ring and finally the 2 keepers.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy