TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

does anyone own a ford 1620

Welcome Guest, Log in or Register

Author

Bill/VA

11-29-2005 15:35:19

Report to Moderator

i have a jubilee and a 1620....have not been able to find anyone with a 1620....does anyone have one????

bill

[Log in to Reply] [No Email]

YELLOW DOG

11-30-2005 16:41:36

Report to Moderator

Re: does anyone own a ford 1620 in reply to Bill/VA, 11-29-2005 15:35:19

Just what do those # mean? Are the last two digits size or engine or what? I got aJ.D. "B" an d a A/C WD 45 I'd sell to get something newer. But I see 1700 series with larger engines than on say 3000 models and J.D. is confusing too. Havent found any listing to such yet. I'm 70 years old and would like to know before I die,Grin.

[Log in to Reply] [No Email]

paul

11-30-2005 17:52:31

Report to Moderator

Re: does anyone own a ford 1620 in reply to YELLOW DOG, 11-30-2005 16:41:36

Good luck figuring out the number/lettering of tractor models!!!! :)

When Ford came out with their compact series of tractors - basically Japaneese tractors assembled in the USA - they used the 1200, 1300, 1700, etc. numbering. The lower the number, the smaller. The bigger the number, the bigger the tractor.

They were good, but basic. The next upgraded series of models were the 1210, 1510, 1710, etc. Little nicer.

Few years later they upgraded to the xx20 series. So, a 1700, 1710, & 1720 would be the same tractor, upgraded with a little better engine, much better hydraulics, a better front wheel drive setup, etc.

--->Paul

[Log in to Reply] [No Email]

paul

11-30-2005 09:55:59

Report to Moderator

Re: does anyone own a ford 1620 in reply to Bill/VA, 11-29-2005 15:35:19

Did not realize thay made a 16xx series. I knew of the 12xx, thought all the others were odd numbers. Learn something new. :)

--->Paul

[Log in to Reply] [No Email]

TomTX

11-30-2005 07:03:05

Report to Moderator

Re: does anyone own a ford 1620 in reply to Bill/VA, 11-29-2005 15:35:19

Ok, I am looking at a phamplet "New Holland 16 to 47hp Compact Diesel Tractors" which shows the following models: 1215, 1220, 1320, 1520, 1620, 1715, 1720, 1920, 2120, 3415.
The 1620 shows: 27.3 gross Hp, 26 hp net engine, 22 pto hp, hydrostatic, 3 cyl diesel, 81.2 cu in (1330cc), etc. This model was replaced with the 1630 which had the sloped front hood, boomer look.
What is your question?

[Log in to Reply] [No Email]

Bill/VA

11-30-2005 22:35:53

Report to Moderator

Re: does anyone own a ford 1620 in reply to TomTX, 11-30-2005 07:03:05

no problem with the 1620, but would like to talk (the forum)in the future if a question or problem comes up. it seems that no one owns one of them in the group.

i also own a jubilee....there are a lot of folks out there that i talk to on questions.

thanks for your information.

bill

[Log in to Reply] [No Email]

JohnJinIL

06-30-2006 09:39:43

Report to Moderator

Re: does anyone own a ford 1620 in reply to Bill/VA, 11-30-2005 22:35:53

Are you still looking for Ford 1620 owners? I have one, with a loader, mid-mount mower deck

[Log in to Reply] [No Email]

Wi Craig

11-30-2005 03:15:48

Report to Moderator

Re: does anyone own a ford 1620 in reply to Bill/VA, 11-29-2005 15:35:19

I thought those numbers were 1320/1520 1720/1920/2120 in the 1990"s. In the mid 1980"s they were 1310/1510/1710/1910/2110. But not the 1st time I was wrong. Do you have a specific question or thinking of starting a new ford club. Grin

[Log in to Reply] [No Email]

TomTX

11-29-2005 15:40:06

Report to Moderator

Re: does anyone own a ford 1620 in reply to Bill/VA, 11-29-2005 15:35:19

I have a New Holland 1630. Are you talking about New Holland or Ford?

[Log in to Reply] [No Email]

Bill/VA

11-29-2005 20:06:28

Report to Moderator

Re: does anyone own a ford 1620 in reply to TomTX, 11-29-2005 15:40:06

no this is a ford 1620 (year 1996)...make in japan.....1220,1320.1520 etc are a all made in japan

[Log in to Reply] [No Email]

Bill/VA

11-29-2005 20:10:57

Report to Moderator

Re: does anyone own a ford 1620 in reply to Bill/VA, 11-29-2005 20:06:28

sorry about the grammar and spelling....did not proof
read before sending reply.

bill

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy