Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Zenith 14996 settings

Welcome Guest, Log in or Register
Author 
willyz

10-22-2005 04:53:59




Report to Moderator

I wonder if anyone can tell me the idle mixture and load adjustments for a Zenith 14996. The MS carb. was changed on my JD 1020 and I need a place to start with on this Zemith.
Thanks,
Bill




[Log in to Reply]   [No Email]
Glen in TX

10-22-2005 07:48:57




Report to Moderator
 Re: Zenith 14996 settings in reply to willyz, 10-22-2005 04:53:59  
I'm just guessing but would try 1-1/4 to 1-1/2 for idle needle and 3/4 to 1 for load needle and try going from there. That seems to be a base setting for Zenith. If running rich close idle if surging or more power needed open it. On load if it balks open load needle more.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy