Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Help w/ Briggs 18HP I/C

Welcome Guest, Log in or Register
Author 
Kirk Grau

07-16-2005 13:36:51




Report to Moderator

OK,

I always get good help here. Last week our Troy-Bilt mower w/B&S engine ran out of gas. I got a can out of the garage to fill it up. It started right up again and ran about 10 seconds and quit. Tried several times to start before giving up for the day.

This mower is 2 years old, but has about 450 hours on the meter. We use it a lot. Oil is changed every 50-75 hours and it seemed like it was running pretty well.

Given the circumstances of running out of gas, I made the assumption that I had put some bad gas into the tank. Drained the tank and put some fresh in. Also changed spark plug just in case. Anyway, have been spinning the starter an awful lot and still not starting. Occasionally get a sputter and maybe a backfire, but hasn"t started. What else do I need to be looking at? Is it possible that I still have some water/bad fuel sitting in the carburetor and just need to keep spinning it until it clears.

Any and all help appreciated.

Thanks,

Kirk

[Log in to Reply]   [No Email]
Robert in W. Mi.

07-16-2005 17:26:01




Report to Moderator
 Re: Help w/ Briggs 18HP I/C in reply to Kirk Grau, 07-16-2005 13:36:51  
If you keep spinning the starter, soon you will be buying one of those too.

Either you had water or dirt in the can and the carbs jets are plugged. Try the bowl first, and if that doesn't work, you need to clean the carb.

I use a little squirt can with gas in it, and squirt a little gas directly into the carb after takeing the breather off.

Robert



[Log in to Reply]  [No Email]
Allan in NE

07-16-2005 14:06:13




Report to Moderator
 Re: Help w/ Briggs 18HP I/C in reply to Kirk Grau, 07-16-2005 13:36:51  
Kirk,

I'd drop the bowl off the carb.

Sounds to me like your fightin' a touch of water. It takes forever to work it out of the carb with the starter.

Allan



[Log in to Reply]  [No Email]
Kirk Grau

07-16-2005 14:12:47




Report to Moderator
 Re: Help w/ Briggs 18HP I/C in reply to Allan in NE, 07-16-2005 14:06:13  
Thanks Allan, It was not obvious to me how the bowl was going to come off. I will go take a fresh look at it.

How goes the wheel adjustment?

Kirk



[Log in to Reply]  [No Email]
Allan in NE

07-16-2005 14:18:14




Report to Moderator
 Re: Help w/ Briggs 18HP I/C in reply to Kirk Grau, 07-16-2005 14:12:47  
Not well,

It's something like 103 in the shade here. Plus the fact that I'm kinda an old guy. :>)

Allan



[Log in to Reply]  [No Email]
Kirk Grau

07-16-2005 16:14:16




Report to Moderator
 Re: Help w/ Briggs 18HP I/C in reply to Allan in NE, 07-16-2005 14:18:14  
You may have a few years on me, but still not old. I am guessing that you are probably about the age my father would be if he had not been taken by cancer 15 years ago. I think of him sometimes when I read your farm posts. He was a farm boy from Iowa, second son and his parents could help the eldest get set on a farm and sent him to college. He was a very successful engineer, but always wanted to get back to the farm. During the '70s he bought about 140 acres in Wisconsin to cut firewood to heat the house since oil was starting to go up in price (sounds familiar). That was how he justified it, but it was mostly to have some place to get out and roam and call his own. As a teenager, I did not always appreciate going out almost every Saturday to clear fence rows and bring home wood, but now I wish I could have the time back. I look back and really think those were our best times together. Just something about working side by side.

I became an engineer largely because of him, but have ended up with a little Horse place (15 acres). I don't ride, but it gives me an excuse to have a couple tractors, Ford 9N and 3600. That's another reason I appreciate your posts, let me know when you start building the horse facilities, that I have some experience with.

Anyway, here in SouthCentral Pennsylvania today it is about 98% humidity, but I have the mower running now. Never got the bowl off, but kept spinning and it finally got started.

Thanks Again,

Kirk

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy