TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Tractor Talk Discussion Forum

scrap iron pices

Welcome Guest, Log in or Register

Author

marlowe

03-03-2004 18:16:17

Report to Moderator

took some in to day and price is 205.00@ ton for prepared 165.00 @ ton for unprepared and 90.00 @ ton for tin this is in central wi.

[Log in to Reply] [No Email]

Sting

03-04-2004 20:45:16

Report to Moderator

Re: scrap iron pices in reply to marlowe, 03-03-2004 18:16:17

I am near Fond du Lac Whats the dif between Prepared and Not Prepared ???

[Log in to Reply] [No Email]

Dan in Wisconsin

03-03-2004 19:36:00

Report to Moderator

Re: scrap iron pices in reply to marlowe, 03-03-2004 18:16:17

Hey marlowe, where in central Wis. you going with the scrap? I have a bunch of it to get rid of. Located in the Antigo area. Regards, Dan

[Log in to Reply] [No Email]

marlowe

03-03-2004 19:52:14

Report to Moderator

Re: Re: scrap iron pices in reply to Dan in Wisconsin, 03-03-2004 19:36:00

SAMUELS in waupaca wi. west side just off 54

[Log in to Reply] [No Email]

marlowe

03-03-2004 19:53:28

Report to Moderator

Re: Re: Re: scrap iron pices in reply to marlowe , 03-03-2004 19:52:14

EAST side not west sorry

[Log in to Reply] [No Email]

Dan in Wisconsin

03-04-2004 03:39:15

Report to Moderator

Re: Re: Re: Re: scrap iron pices in reply to marlowe, 03-03-2004 19:53:28

Thanks marlowe, I'll look them up and see if I can make my wife happy. I knew there was a scrap yard down that way but never knew who they were.

[Log in to Reply] [No Email]

Chuck - WI

03-04-2004 05:35:58

Report to Moderator

Re: Re: Re: Re: Re: scrap iron pices in reply to Dan in Wisconsin, 03-04-2004 03:39:15

Also check w/ Wausau Steel ... 3 wks ago was running ~ 90 / tn general scrap .. tin / panels less

[Log in to Reply] [No Email]

Dan in Wisconsin

03-04-2004 08:31:50

Report to Moderator

Re: Re: Re: Re: Re: Re: scrap iron pices in reply to Chuck - WI, 03-04-2004 05:35:58

Thanks Chuck, I'll do that. They're a little closer to me and easier to get to. Hope the snow stays away so I can get at some of this stuff. Doesn't sound to good for the upcoming week-end though.

[Log in to Reply] [No Email]

Chuck- WI

03-04-2004 10:48:30

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: scrap iron pices in reply to Dan in Wisconsin, 03-04-2004 08:31:50

Dan --- just checked national weather ... Wausau was just to get rain w/ little snow .. as of noon.. now snow sleet w/ 4" tonight + 2 Fri .. sending it your way via 52

[Log in to Reply] [No Email]

Dan in Wisconsin

03-04-2004 20:21:19

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: scrap iron pices in reply to Chuck- WI, 03-04-2004 10:48:30

Aaaahh thanks Chuck, you really didn't have to. March in Wisconsin, most anything can and probably will happen.

[Log in to Reply] [No Email]

Dave

03-03-2004 19:01:01

Report to Moderator

Re: scrap iron pices in reply to marlowe, 03-03-2004 18:16:17

Dam, did I get the shaft. took some in today for $60.00/ton. tin, hand rail pipe, old farm equ., I will call around next time! this is in N-E IL. Dave

[Log in to Reply] [No Email]

Larry NE IL

03-03-2004 19:49:39

Report to Moderator

Re: Re: scrap iron pices in reply to Dave, 03-03-2004 19:01:01

Hey Dan,
Where are you located? I'm around Roselle/Schaumburg.

[Log in to Reply] [No Email]

tom

03-03-2004 22:15:08

Report to Moderator

Re: Re: Re: scrap iron pices in reply to Larry NE IL, 03-03-2004 19:49:39

Hi in kansas the price is 60 a ton.

[Log in to Reply] [No Email]

David from Kansas

03-04-2004 07:20:44

Report to Moderator

Re: Re: Re: Re: scrap iron pices in reply to tom, 03-03-2004 22:15:08

Paying $85 for prepared scrap in Lyons, KS

[Log in to Reply] [No Email]

Alex

03-04-2004 08:39:19

Report to Moderator

Re: Re: Re: Re: Re: scrap iron pices in reply to David from Kansas, 03-04-2004 07:20:44

You Guys
If you can get it to Boge in Wichita you'll get around $120 to $150 for it. Might call them, if its worth the drive.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy