Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

massey harris

Welcome Guest, Log in or Register
Author 
bill olson

12-05-2003 17:03:39




Report to Moderator

What size rear rubber came from the factory on the 1944 101sr. std front I have one that was delivered on steel due to the shortage of rubber in the war years it was later cut down and 26 inch rubber installed,it appears much to small




[Log in to Reply]   [No Email]
Dave_Id

12-05-2003 18:38:44




Report to Moderator
 Re: massey harris in reply to bill olson, 12-05-2003 17:03:39  
6.00x16



[Log in to Reply]  [No Email]
Rears, Dave!

12-06-2003 01:59:42




Report to Moderator
 Re: Re: massey harris in reply to Dave_Id, 12-05-2003 18:38:44  



[Log in to Reply]  [No Email]
Dave_Id

12-06-2003 07:54:49




Report to Moderator
 Re: Re: Re: massey harris in reply to Rears, Dave!, 12-06-2003 01:59:42  
Sorry about that! 13x26 for the Standard rears. I put 14x26 on my Standard, there is a picture of it on the photos. But they are so big, that they rub slightly on one of the fender brackets, and I had to do some adjusting on the belt pulley to clear the tire.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy