Brands of hammer mills

Hammer mill, as they say it has metal bars that hammer the stuff through a mesh screen.

Burr mill, the 2 plates that grind the grain between them.

Roller mill, which pressed the grain through 2 rollers, like a steam roller does to a tar road.

For some baby animals, a few people prefer the roller mill, as the grains will not have sharp edges, possibly easier to digest.

The hammer mill is the fastest, and is almost all that is still made. Some roller mills are used for wet corn stored in silos, but that's beyond what you are looking for.

I'm more familier with 'grinder/mixers' which use a hammer mill to grind the feed, and a big tub on the machine to store the feed and mix several different items together - corn, oats, minerals - all in the same batch.

Are you looking for the real old stand-alone mills, that would grind & dump directly onto a wagon or such?

--->Paul

I live in Fort Worth, TX and I am looking to buy a hammer mill. Would you be willing to sell yours?

Looking foreward to hearing from you.

Sincerely,
Jim Goad

also gehl and Bearcat made hammermill. If you are getting one and think you might somday gind hay like to mix in slop, or make mulch, ect, get one that has the table on the end of the mill, at an angle from the pully, not one whose table is opposite the pulley on the mill. Youll want a 8in belt that puts your tractor around 30 or more ft from the mill. If you ever need to repair a belt take it to a shoe cobbbler. They can re glue and resew it