Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Mounting mower deck on Bolens-Iseki G174

Welcome Guest, Log in or Register
Author 
Harold Hubbard

08-28-2003 18:42:51




Report to Moderator

I had this question posted on the garden tractor board, but it's already on page three and nobody has answered. I hope more people will read it here. Does anybody have a manual, photo, or sketch, or even a good description of how an FMC 17350 deck mounts on a Bolens-Iseki G174. My neighbor recently bought this tractor and mower. The mower was not mounted when he got it, and there was no manual. We figured out the drop box from the front PTO, and that the cables go over a pair of sheaves under the transmission, but that was the end of it. There are two heavy arms and a long rod that look like they should pin through a pair of frame holes above the drawbar, then connect to the three point lift arms somehow, but so far no arrangement that we have tried seems to work.

The tractor also has a loader mounted on it, does this have to come off before the mower goes on?

[Log in to Reply]   [No Email]
IanC

08-29-2003 18:01:39




Report to Moderator
 Re: Mounting mower deck on Bolens-Iseki G174 in reply to Harold Hubbard, 08-28-2003 18:42:51  
If you've got a 17350 deck you must have the 3cyl G174. Go to your AGCO dealer and see if they have books from a White Field Boss FB-16, same tractor with silver paint. We were White and Bolens dealers so we sold them painted white and silver. Bolens quit importing the diesels when they were bought up by GardenWay (now bankrupt).



[Log in to Reply]  [No Email]
Jim 2222

05-06-2006 17:18:21




Report to Moderator
 Re: Re: Mounting mower deck on Bolens-Iseki G174 in reply to IanC, 08-29-2003 18:01:39  

Hi I have the same tractor and deck the loader mounts do need to come off I can send you installation instructions if you send me your email also if you will not be using the loader mounts I would like to buy them because I am mounting a loader on my tractor thanks Jim.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy