TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

International tractor parts

Welcome Guest, Log in or Register

Author

fford

01-24-1999 14:24:32

Report to Moderator

wanted to buy---
fasthitch for 450 I H.

[Log in to Reply] [No Email]

Bob Schultz

05-01-2002 06:10:22

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I am in need of engine d155 IH dozer 500c or any help if d179 engine will work thanks Bob

[Log in to Reply] [No Email]

Rob Hargraves

03-19-2002 12:24:12

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

Looking for engine head for 1963 International 340. Engine is C-135

[Log in to Reply] [No Email]

Rob Hargraves

03-19-2002 12:23:36

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

Looking for engine head for 1963 International 340. Engine is C-135

[Log in to Reply] [No Email]

mark anderson

02-25-2002 19:14:25

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

hello, i need starter brushes for an older international 414 40 horse diesel farm tractor (not sure of year...around 1948)

[Log in to Reply] [No Email]

MARGERY

01-08-2002 11:48:02

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I NEED THE PHONE NUMBER FOR INTERNATIONAL TRACTOR PARTS COMPANY??

[Log in to Reply] [No Email]

John Hasse

01-02-2002 19:14:29

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I am looking to for a pair of front weights for an IH "H". I am also lookig for a pair of fenders.

[Log in to Reply] [No Email]

steve bender

12-13-2001 19:34:48

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I have a model 284 international tractor for sale. It's a complete mowing tractor and the engine is seperated from tractor. Rest of tractor is in excelent conditon and there is 60" belly mower,hydraulic scraper blade. This tractor can be repaired or parted out.

[Log in to Reply] [No Email]

Ryan Wardlow

04-02-2006 09:26:50

Report to Moderator

Re: Re: international tractor parts in reply to steve bender, 12-13-2001 19:34:48

Hello, Just wondering if your International 284 is still available, or if you have any parts. Also, where are you located? I see it was years ago but I thought I'd see if you still have anything. Thanks. Ryan

[Log in to Reply] [No Email]

bbfarms

04-06-2006 18:15:10

Report to Moderator

Re: Re: international tractor parts in reply to Ryan Wardlow, 04-02-2006 09:26:50

Give me a call. (Bill Burger @313-806-3411) I jest bought a 284 and I found a few parts...but not the ones I need. Myabee we could help each other...Bill

[Log in to Reply] [No Email]

Tanya

05-15-2006 10:26:41

Report to Moderator

Re: Re: international tractor parts in reply to bbfarms, 04-06-2006 18:15:10

I have a 284, gas for sale. Located outside Columbus, OH. Great shape, moving and don't need anymore. 5' belly mower, 5' blade, plow and disk.

[Log in to Reply] [No Email]

marvin landers

11-11-2001 05:46:15

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

Iron spoke rear wheels for 1920 International Tractor, do you have them?

[Log in to Reply] [No Email]

Terry Cole

11-04-2001 15:48:36

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

Looking for a fuel shutoff valve for an IH 424 carburator.

[Log in to Reply] [No Email]

karl ehnis

10-11-2001 20:23:15

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

looking for a gas tank and hood for a cub long stripe

[Log in to Reply] [No Email]

sodly

01-17-2008 18:16:58

Report to Moderator

Re: Allis Beachmasters in reply to Greg_Ky, 01-17-2008 18:05:44

Any idea where to find one in the states? You're not talking about Classic Tractor Fever's calendar, are you? I know the owner was affiliated with Dupont at one time. Thanks.

[Log in to Reply] [No Email]

NANCY FRENCH

03-20-2001 03:40:08

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

LOOKING FOR PART NO.677 273 R2YOKE TRACK ADJUSTER FOR A 500C CRAWLER.

[Log in to Reply] [No Email]

Breanna Czaja

02-14-2001 11:33:53

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I am looking for a international tractor parts, i just need the frount end like the axel, wheels spindels, hubs and this is for a heavy duty tractor, the year is 1968, i need this tractor for field work in the spring and help would be greatly appriciated.

[Log in to Reply] [No Email]

alan Schaeffer

02-10-2001 10:19:46

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

looking for a rebuild kit for international 966
farm tractor, desel non turbo,power shift tranny, .need clutch and pressure plate, , oil pump and fly wheel, would be interested in purchasing complete wreck or . alberta canada

[Log in to Reply] [No Email]

keith

01-24-2001 09:05:23

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

looking for a cutter bar for a backhoe bucket. anybody got one?

[Log in to Reply] [No Email]

Ken

12-12-2000 18:06:50

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I have an Interantional 274 tractor and suddenly the hydraulic system has quit. I am unable to lower the blade for snow plow. Any information on hydraulic system would be appreciated?

[Log in to Reply] [No Email]

Tim Milham

12-04-2000 15:37:25

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

Looking for a steering assist hydraulic cylinder
for a 384 IH. Also a cylinder from a B414 and 354 should be the same. Would anyone know where I might find one of the cylinders or know of any other models that also used this cylinder.

[Log in to Reply] [No Email]

Huck

11-04-2000 12:38:49

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I'm looking for a TD6 radiator cap for a 1956 International tractor.

[Log in to Reply] [No Email]

Ken Jessup

08-20-2000 16:13:50

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I am looking for a picture breakdown of a TP25-series B and TD30. crawler tractor.

[Log in to Reply] [No Email]

Travis Jessup

04-11-2000 08:32:23

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

i'm tring to restore a farmall 140. I don't know the year but the guy i got it from said it was the last year they made this model. If you can help I would be in great thanks to ya. I Need manuals and where to get part and if you know if there is a international place near by. I Live in Mt Airy NC. Thanks, Travis Jessup

[Log in to Reply] [No Email]

Orville Benjegerdes RESTOR 706 GAS

02-24-2000 09:18:36

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I HAVE BOUGHT A 706 GAS TRACTOR AND MY NEED PARTS TO FIX IT BACK TO LIKE NEW.
ANY INFO WOULD BE HELPFUL ORVBEN@PCPROS.NET

[Log in to Reply] [No Email]

Steven Bohannan

01-22-2000 12:46:15

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I currently have a 6 ft and 4 ft bucket on my
international. Due to the type of work I am doing around my land, I searching for input where I may find some teeth to have welded, etc to my bucket for easier brush pick up. I would appreciate your input on this.
Thanks
Steve

[Log in to Reply] [No Email]

Steven Bohannan

01-22-2000 12:42:39

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I currently have a 6 ft and 2 ft bucket on my
international. Due to the type of work I am doing around my land, I searching for input where I may find some teeth to have welded, etc to my bucket for easier brush pick up. I would appreciate your input on this.
Thanks
Steve

[Log in to Reply] [No Email]

john welch

12-26-1999 09:45:35

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

looking for a plow for a international tractor

[Log in to Reply] [No Email]

matt

09-07-1999 08:36:49

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

I am looking for lower arm of three point hitch for a 300 utility international, any help is appreciated,

[Log in to Reply] [No Email]

marty varriano

03-18-2000 19:53:26

Report to Moderator

Re: Re: international tractor parts in reply to matt, 09-07-1999 08:36:49

I would like to purchase an Internationl cub high-boy implement reach me at the web site above

[Log in to Reply] [No Email]

Dave M

08-17-1999 10:00:59

Report to Moderator

Re: international tractor parts in reply to fford, 01-24-1999 14:24:32

Please advise price and delivery on 1pc Stabilizer Cylinder for #3141 Backhoe. If you can't supply please advise.

[Log in to Reply] [No Email]

Al Hendon

09-12-2000 20:42:07

Report to Moderator

Re: Re: international tractor parts in reply to Dave M, 08-17-1999 10:00:59

I need help diagnosing a problem on a 3141 int. backhoe there is very little power on the bucket and the hoe part doesnt work any help will be appreciated e-mail me at ba1@netnitco.net

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy