Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

Which tools?

Welcome Guest, Log in or Register
Author 
farmer mike

10-11-1999 19:08:09




Report to Moderator

ok, this may sound really dumb, seeing as how i liek to try and put myself off as a kinda experienced shop guy. anywho, i am starting goin about getting soem tools around so i can really make ma mad and buy a tractor. well, anywho, i was wondering, after the normall stuff like box end/ open end, sockets, toolbox, drill, hammers, chisels, what would you suggest i get after that?




[Log in to Reply]   [No Email]
Burrhead

10-18-1999 18:41:12




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
You might come out better to move next door to Mr Gadget, he don't mind loaning out wrenches.



[Log in to Reply]  [No Email]
Clint

10-17-1999 19:52:50




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
In the over $50 category- get a good air compressor that puts out at least 14 cfm. Don't be taken in by bogus hp ratings. Then start collecting air tools. Don't skimp on quality here, either. Buy Chicago Pneumatic or Ingersoll-Rand, or else you will need a much bigger compressor. The difference in torque and air consumption between these and the knock offs that look just like them is unbelieveable! For less than around $50, a 2 ton floor jack, some jack stands, a stubby flourenscent drop light(pays for itself in light bulb savings) and won't burn your face when it falls on you... and start hitting those auction sales for a cheap used A/C buzzbox arc welder. Every farmer already has one, so they go cheap. Used air compressors/tools are rarely a good buy. Get yourself on the harbor freight mailing list and let it be your guide. I buy quite a bit from them, and have been pretty happy, but if I see the same item locally and the price is pretty close, I'll buy it locally so if it goes sour I'll have someone to scream at. HF is petty good on warranty, but they stick to the warranty dates like lawyers, so if you buy an el cheapo impact wrench from them and don't use it for a while, then it it fails on its 3rd use, you are s.o.l.

[Log in to Reply]  [No Email]
Clint

10-17-1999 19:51:29




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
In the over $50 category- get a good air compressor that puts out at least 14 cfm. Don't be taken in by bogus hp ratings. Then start collecting air tools. Don't skimp on quality here, either. Buy Chicago Pneumatic or Ingersoll-Rand, or else you will need a much bigger compressor. The difference in torque and air consumption between these and the knock offs that look just like them is unbelieveable! For less than around $50, a 2 ton floor jack, some jack stands, a stubby flourenscent drop light(pays for itself in light bulb savings) and won't burn your face when it falls on you... and start hitting those auction sales for a cheap used A/C buzzbox arc welder. Every farmer already has one, so they go cheap. Used air compressors/tools are rarely a good buy. Get yourself on the harbor freight mailing list and let it be your guide. I buy quite a bit from them, and have been pretty happy, but if I see the same item locally and the price is pretty close, I'll buy it locally so if it goes sour I'll have someone to scream at. HF is petty good on warranty, but they stick to the warranty dates like lawyers, so if you buy an el cheapo impact wrench from them and don't use it for a while, then it it fails on its 3rd use, you are s.o.l.

[Log in to Reply]  [No Email]
Hey busdriver

10-14-1999 22:32:52




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
One of the most important thing to get is a FIRE EXTINQUISHER , you never know when you might need one. It's amazing how far sparks will fly and what will catch on fire from one little spark.
Don't ask how many times it has happened to me, luckily nothing I wasn't able to handle.
Stan



[Log in to Reply]  [No Email]
Jim from Stonepile

10-15-1999 22:08:39




Report to Moderator
 Re: Re: which tools? in reply to Hey busdriver, 10-14-1999 22:32:52  
Amen on the FIRE EXTINGUISHER! I lost a 1982 MonteCarlo because I didn't have one close by! I now keep one in each vehicle, one with the welder & torch, keep them close to the stoves. Keep a check on them monthly! It's cheap insurance! Good luck on your projects JIM



[Log in to Reply]  [No Email]
john d

10-14-1999 14:08:39




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
Invest in a rugged vise, and put it on a sturdy workbench of some sort. I'ts no fun (and often dangerous) to try to fix things that won't hold still while you work on them!

A decent trouble-light on about 25 feet of cord is a good idea to have around. Fasten a magnet on the back to make it even more versatile.

Another worthwhile addition that I haven't seen mentioned below is a high-quality, comfortable, name-brand safety goggles. When you pound on things (and you will!) wear them!!

[Log in to Reply]  [No Email]
big fred in STRONG agreement!

10-14-1999 21:03:22




Report to Moderator
 Re: Re: which tools? in reply to john d, 10-14-1999 14:08:39  
Definitely good safety glasses! Wouldn't work without 'em. And for grinding and wire brushing I use a full face shield. Got mine at Harbor Freight for only about five bucks. Good safety glasses will run under ten bucks, passable ones for much less. Better to use passable than none at all. If this hasn't convinced you, talk to John "The Red" Fritz. He will convince you.



[Log in to Reply]  [No Email]
MrGadget: A Bank Loan!!!

10-13-1999 19:12:44




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
No, seriously...

After I lost my butt raisin' hogs, and wrecked a truck, I went to work as a mechanic in the detail shop at a Chevy dealer (1975)...using the same tools I bent and broke on small block Chevys in high school (in the 60's): An open/box end set, assorted screw drivers, a pliers, hammer, crescent, and vise grips.

Before I left there (1978), I was front line motor man with a full Snap-on rollaway (and the Snap-on dealer had a new house!)

Point is this: I STILL have that Snap-on rollaway and EVERY tool I ever bought! Buy good tools, one at a time, and take care them. They will last you a lifetime.

P.S. Don't forget the balin' wire and duct tape.

[Log in to Reply]  [No Email]
Burrhead

10-16-1999 08:33:19




Report to Moderator
 Re: Re: which tools? in reply to MrGadget: A Bank Loan!!!, 10-13-1999 19:12:44  
Since you have all those tools laying around anyway. I need to borry a ranch to take the thang off of this hickey. I need to fix it cause I can't adjust the doo-thangy til I do.



[Log in to Reply]  [No Email]
Hickey on the thangy

10-17-1999 18:20:27




Report to Moderator
 Re: Re: Re: which tools? in reply to Burrhead, 10-16-1999 08:33:19  
Most Texas do-thangy's are small and self-adjusting.



[Log in to Reply]  [No Email]
Burrhead You must be a yuppie.

10-18-1999 18:32:48




Report to Moderator
 Re: Re: Re: Re: which tools? in reply to Hickey on the thangy, 10-17-1999 18:20:27  
Can't believe everything they teach you nowadays.



[Log in to Reply]  [No Email]
Dick L in NW Ohio

10-13-1999 15:13:44




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
Mike, I live only a short distance from you. When you get your tractor you can call on me any time. I eat at uncle Bob's in Angola three times a week at least. If you get in around 7:00 to 8:00 pm come over and chat. (old bald guy with handle bar mustash) always set along East wall.



[Log in to Reply]  [No Email]
farmer mike

10-13-1999 18:04:59




Report to Moderator
 Re: Re: which tools? in reply to Dick L in NW Ohio, 10-13-1999 15:13:44  
where is uncle bobs? name sounds familiar, but...CRS. ever in coast to coast haredware store? wanna go for a ride?



[Log in to Reply]  [No Email]
big fred

10-13-1999 07:23:49




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
Mike, I assume you've got a limited budget, I know I did when I was your age. I would suggest repair manuals, an assortment of glommers and at least three beaters. If you plan on doing any serious restoration (showroom condition) you will need Vise-Grips.

Seriously, though, since the toughest part (for me) of tractor work is cleaning, I would suggest a good assortment of brass, steel and nylon brushes, some putty knives, a paint scraper, utility knife, dental picks (you'll wonder how you ever got along without 'em) and a few good files. Oh, and a heap of shop rags.

[Log in to Reply]  [No Email]
rod

10-12-1999 18:02:36




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
Essential are

Fridge for beer

old seat for friends to sit and laugh at you

calendar so you can see how long parts will take to arrive

Large Sledge Hammer

Lots of spare cash

friend with tools he can lend you

Shop manuals usually don't have picture or section you need but good to light fire with.

and most important good Sense of Humor



[Log in to Reply]  [No Email]
farmer mike

10-12-1999 18:53:42




Report to Moderator
 Re: Re: which tools? in reply to rod, 10-12-1999 18:02:36  
well, to young for beer(pepsi tastes better anywho), but i do have some calenders :-)



[Log in to Reply]  [No Email]
rod

10-13-1999 05:34:38




Report to Moderator
 Re: Re: Re: which tools? in reply to farmer mike, 10-12-1999 18:53:42  
Seriously thogh you can't beat a good service manual and some old timer who used or drove the tractor you have. A friend of mine had used my old 49 A JD and showed me lots of tricks to service and maintain the machine. I now have a 52 Ferguson and he had used one when working on a farm so lots of good advice. Also on message boards like this too.

rod



[Log in to Reply]  [No Email]
Bill From Ontario

10-12-1999 17:00:18




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
Go on Ebay, search on Snap-on, and get one each, 1/4", 3/8", and 1/2" drive clicker torque wrenches. While you're there, get yourself a 1/4" die grinder and some buffing wheels, stones, and carbide burrs. You'll also find inexpensive valve grinders, sleeve pullers, and all the special engine tools. Take the advice and get yourself a good AC/DC welder. Torches are definitely a must.
Good luck. Bill

[Log in to Reply]  [No Email]
John

10-13-1999 03:33:06




Report to Moderator
 Re: Re: which tools? in reply to Bill From Ontario, 10-12-1999 17:00:18  
I would add to this list a vertial mill with a 10"x59" table and a 13"x80" lathe plus atachments for each.



[Log in to Reply]  [No Email]
Bill From Ontario

10-13-1999 13:19:06




Report to Moderator
 Re: Re: Re: which tools? in reply to John, 10-13-1999 03:33:06  
Don't forget the 10 hp, verticle compressor, spray booth, Boring machine, overhead crane, tire changer, etc....
But seriously, I've found, bought or seen the items that I originally mentioned for a fraction of new cost. A torque wrench is a must for restoration, so why pay $300+, when they usually go on Ebay for under $100, same with the other items. If you find some used specialty tools here and there, and you're serious about this hobby, then you'll save yourself a bundle rather than farm it out.

[Log in to Reply]  [No Email]
JerryU

10-12-1999 06:59:29




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
Agree on the torch and welder, even if it is a little 100 amp buzz box (which I find very handy) and a small portable torch. Need pry bars, jack and blocking (2' sections of RR ties work good for blocking up the tractor).

Air compressor, 450 Ft. Lb impact wrench is nice.

Essential is a 3/4" drive socket set.
Since these are pricey and you only use them occaisionlly (they work good as bearing drivers) I would recommend an inexpensive set from like Harbor Freight.(I have no connection whatsoever with Harbor Freight or any other tool firm). These are less than $50. Normally, I would not recommend a cheapie, but you don't use it a lot and I've had mine for several years.

Beyond that, a lot of ambition.

JerryU

[Log in to Reply]  [No Email]
Hey busdriver

10-11-1999 20:49:16




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
The tools I find the handiest is my arc welder and my oxy actelene torches. I'm not a welder but when things break, I can fix them( doesn't look pretty sometimes). With that I will have to add a angle grinder, sawzall. Good luck in your shop project.
Stan



[Log in to Reply]  [No Email]
Paul R

10-11-1999 20:24:50




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  

Two or more pry bars, two or more crescent wrenches, two more vice grips and a bouquet. Maybe go pick one, to help save up for a bigger tool box.



[Log in to Reply]  [No Email]
sammy the RED

10-11-1999 19:57:06




Report to Moderator
 Re: which tools? in reply to farmer mike, 10-11-1999 19:08:09  
A good set of screwdrivers and a cheater bar.



[Log in to Reply]  [No Email]
charlie

10-12-1999 19:48:48




Report to Moderator
 Re: Re: which tools? in reply to sammy the RED, 10-11-1999 19:57:06  
4 ton porta power,10 ton bottle jack,5 ton jack stands,20 inch channel lock pliers(best oil filter wrench made),3/8 air ratchet,and a good mig welder.



[Log in to Reply]  [No Email]
Leon Miller

10-12-1999 21:18:29




Report to Moderator
 Re: Re: Re: which tools? in reply to charlie, 10-12-1999 19:48:48  
You will need a bunch of hammers, large and medium sizes. Assorted Pipe wrenches. You will find a 2 to 3 ft section of rail road track will
make a nice anvil to streighten things you bend..
ie steering rods etc.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy