Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

What's Your Favorite Shop Work?

Welcome Guest, Log in or Register
Author 
Glenn F.

04-16-2008 15:24:01




Report to Moderator

I enjoy shop work of all kinds: mechanical, auto body, carpentry, welding & fabrication, general repair work, furniture refinishing, etc.

However, my favorite of all is welding. I love repairing basic old cast off farm machinery and giving it a new lease on life. I also love fabricating brackets, latches, simple mechanisms, etc. Of course part of the fun is making all these repairs with my only cost being for welding rods (and electricity, etc.). THe other day I was in my brother's stancion barn and he commented his favorite of the gutter grates in the barn is the one I fabricated years ago out of some old silo banding we had on hand.

I just re-stocked my iron supply a couple weeks ago....did a little work for a fellow and he let me pick through his scrap pile. I've got lots of projects awaiting me, but it's work before play...gotta get this honey-do list finished first!

What's your favorite type of shop work?


Glenn F.

[Log in to Reply]   [No Email]
FixaLinc

04-17-2008 14:01:37




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
The final test, paint or decals and it's gone from my shop so I can see it empty and clean again just for a bit lol. Never stays clean long enough.



[Log in to Reply]  [No Email]
Stumpalump

04-17-2008 09:14:44




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
I love to modify anything. Hoping up chainsaws and even my weedeater. I fool with built up Jeeps to take off road. I basically find joy in making anything stronger,more powerfull or modify it to last longer. I even sharpen all my shovles.



[Log in to Reply]  [No Email]
twomen

04-17-2008 06:40:46




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
Fixing anything - furniture, small appliances, my trucks (5-ton bob tails) the kinda stuff you go back and look at when your done just for the "warm" feeling it gives you to see something well done you did yourself.



[Log in to Reply]  [No Email]
b.t.s.

04-17-2008 03:24:52




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
I've tried lots of stuff, most recently I took a course on blacksmithing out in Missouri(Ozark school of). What a hoot that was! I may take it again to get a good headstart.Made some furniture and a clock case or 2. A few black powder firearms, some stonework. But I think the biggest thrill is metalwork, for me. I'm trying to build a steam engine now on an older pattern maker type 9" lathe/vertical mill combo. Even the simplest operations are challenging and extremely gratifying.I must do my "smithing outdoors by the barn but I can work on the lathe anytime!

[Log in to Reply]  [No Email]
chvet73

04-16-2008 20:35:12




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
I love all of it. My biggest problem is getting enough time to do the play projects as opposed to the ones that have to be done.



[Log in to Reply]  [No Email]
old

04-16-2008 19:42:46




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
I would have to say welding then getting a tractor to run that hasn't in years. I love to build something from nothing and then see it work



[Log in to Reply]  [No Email]
dr sportster

04-16-2008 18:59:33




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
I think to take some marginal swap meet part and bring it back to life.I have a bead blast cabinet to help and a buffing stand,touch up gun,Devlbliss gun.Lots of high temp spray bombs and stuff.Press for straightening.As far as welding and machining I get alot of do overs.Once I was making a part for my bike that took five tries.First machining ok then welding warped it.Then welded first made machining mistake etc.Every winter I build two Harley motors for freinds but last two years nothing.It was nice to not have any specific task so I build one of those english wheels.It took longest to make the anvils[rollers]Then I bought a set of six from Harbor freight for 80 bucks.It was taking me a day to machine each roller without a radii cutter.I made a new yoke for the larger chinese ones.Now I have two sets.but you have to change yokes.One homemade set one Chinese.I made a couple practice shapes from aluminum.The thing works good but It takes uo a heckof alot of room and I dont really need one desparetly.Now Im making a plate and angle bracket to weld on to the far side of the english wheel to hold the leather sandbag that you strike the metal on.The legs are old cast iron lathe legs.All the parts like the large wheel are from a dumpster.The large wheel was a postal machine pulley so I put it in the lathe and used my right angle drill and a disc sander to remove the wear from the pulley and smooth it and polish.I built[redid really] a 1964 Sportster I had taking up space with a Paucho rigid frame to the new old school look With scallops on the tank and leaded in tailight on a dresser front fender turned backwards on the rear.I had to get this bike out of the way to work on the english wheel.Then I painted the shop floor.It was nice to go into the shop without any schedule or jobs but my own stuff.The english wheel still needs some type of paint job but a freind gave me some old Ford lacquer with silver basecoat and blue.It was rewarding to finish some of things I had been meaning to do but never had time.I also Tig welded an aluminum horseshoe oil tank made all fittings on the lathe and then when done did not fit onto bike without removing motor.OOPs.Some of the tig around the filler spout got sloppy and its in the scrap pile.I added a used horizontal band saw and a floor mount drill press from a garage sale.Squeezed in the saw but the drill press is on the porch.Sunday smoke poured out of my bench mount drill press then it worked fine.[Its done this before]The new one is a Jet and is much nicer.But the bench one sits on my power tool cabinet.Im running out of room and dont know where to put it but its all good.Any day in the shop is a good day and has its rewards.

[Log in to Reply]  [No Email]
jose bagge

04-17-2008 04:50:15




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to dr sportster, 04-16-2008 18:59:33  
Love the "home fabricated" equipment-
My English Wheel roller was found in a scrap yard- it looks like the ball end from the world's largest 3 point hitch,about 10" around, I dunno what it was origially. Saw it and immediately thought "english wheel".
The addition of the table for your shot bag to the english wheel frame is a great one. Not many guys "hammerin' into bags" anymore!



[Log in to Reply]  [No Email]
dave guest

04-16-2008 18:52:07




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
Cars and trucks and motorcycles and tractors that will not run. Had to buy over 70 of them. They followed me home. Best is when they say nobody can get it to run. Welding is nice, too. Conduit bending was my forte, but no need for it anymore. Plasticate everything. Electrical is good because hardly anybody can figure out what you are doing. Air conditioning same.



[Log in to Reply]  [No Email]
msb

04-16-2008 18:27:25




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
Anything to do with John Deere 4020 Diesels. Love to make them like new again.



[Log in to Reply]  [No Email]
bradk

04-16-2008 17:31:24




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
Carburetors.

No one else in my area rebuilds carbs anymore.Tractors,cars,whatever,so I get alot of 'em. Makes me feel wanted(lol)!

I dig metal fab projects also. ~brad



[Log in to Reply]  [No Email]
mjbrown

04-16-2008 17:21:48




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
I make my living in a shop (boats) so I do a lot of different stuff but I like welding best. My favorite welding is tig welding aluminum or stainless.



[Log in to Reply]  [No Email]
jose bagge

04-16-2008 17:08:04




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
third party image

i'M WITH YOU..I love metal fab, and would rather make something out of metal than anything else. I would rather make it than buy it, build it from scratch than from a kit, and use junk yard parts whenever possible. I've even made by own tools- sheet metal brakes, bead rollers, tubing knotchers, english wheel. Love metalwork, and consider it an art. Raced late model stock cars for years and years building my own chassis, and now build everything from hotrods to hotwalkers.
I've shown this one on this forum before- no kit here, started as 3 lengths of 2x3 box and an error on a stock car chassis.
Wood is for fences!

[Log in to Reply]  [No Email]
Hal (WA)

04-16-2008 22:45:37




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to jose bagge, 04-16-2008 17:08:04  
Looks like a 64 or 65 Nova SS in the foreground. Years ago, I had one that was an original V8/4speed 64. It went real well, but handled lousy. A guy came along and offered me a bunch more than I thought it was worth, so I sold it, and I have regretted it ever since. It was a neat, straight car.

Today several companies have kits to put better, more modern front suspension in the early Novas. I sure wish they had existed when I had my 64. The car also sure could have used the disc brakes that the kits have--the stock drum brakes were not really adequate, considering how fast the car would go.

The little bit I can see of your Nova is impressive, as is the roadster. Does the roadster have a fiberglass body? The IFS is neat, and I bet that handles a lot better than if it had a solid axle type frontend. Would sure like to see more pictures of your toys!

[Log in to Reply]  [No Email]
jose bagge

04-17-2008 16:25:34




Report to Moderator
 a few more pics... in reply to Hal (WA), 04-16-2008 22:45:37  
third party image

third party image

a few more pictures...frame rails started life as a Stock car coil-over rear clip that I mis-measured...front suspension and rear are junkyard V8 mustang II...coil-overs, panhard bar, 355 are all left over stockcar stuff. fabbed up the hairpins, mounts, glassed in sheetmetal floor w/tunnel. Cage actually goes through the body and under dash to provide safety and support steering.

[Log in to Reply]  [No Email]
jose bagge

04-17-2008 16:37:49




Report to Moderator
 and the Nova... in reply to jose bagge, 04-17-2008 16:25:34  
third party image

Brother's father in law's....he has a lot of cool stuff, shot the paint, wired and plumbed, and did the interior on the roadster. A great guy...



[Log in to Reply]  [No Email]
Irv (Ia)

04-17-2008 07:14:31




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Hal (WA), 04-16-2008 22:45:37  
I can sure identify with the drum brakes. The only new car I ever had was a 1966 Mercury Cyclone GT. It would hit 120 mph in nothing flat and took a mile to get it to stop. Worst brake fade I ever saw with only 1 1/2" wide shoes.

Irv*



[Log in to Reply]  [No Email]
Mike M

04-16-2008 16:57:20




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
I don't know about a favorite ? I like the mechanical work,restoration,fabrication,and best of all figuring out what problems others never could.

But I can tell you I sure hate the cleaning up part !



[Log in to Reply]  [No Email]
Gene Davis (Ga)

04-16-2008 16:39:57




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
Working on the restoration of my Earthmaster tractor.



[Log in to Reply]  [No Email]
Fawteen

04-16-2008 16:39:01




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
Yep, welding and what I call "junkyard fabrication". I get a lot of pleasure out of knowing what I want something to do and then figuring out a way to do it with what I have laying around or can find for little or no cash. I've built a lot of things out of my junkpile or scrounged used steel. Hardly ever go out and buy steel.

Also do a little "yard art" when the mood strikes me.



[Log in to Reply]  [No Email]
Bus Driver

04-16-2008 16:32:43




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
Yes, welding. As you know, lots of people enjoy golf. Many of those who enjoy golf are really not very good at it. I enjoy welding.



[Log in to Reply]  [No Email]
guido

04-16-2008 16:00:04




Report to Moderator
 Re: What's Your Favorite Shop Work? in reply to Glenn F., 04-16-2008 15:24:01  
Hello Gleen F.
I have my honey do list down to one item. But I STILL STEAL TIME TO WORK ON SMALL ENGINES!
I do it as a hobby as much as i do it for pocket money. I have an old Wisconsin Robin on my splitter, with a cranck hadle for starting may be fifty years hold or so and still splitting wood.
So when I'm in the shop it is usually small engine work or play with them for me. Guido.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy