Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Torch Cart Options

Welcome Guest, Log in or Register
Author 
Glenn F.

04-01-2008 21:08:02




Report to Moderator

I am about to begin building a cart for my torch. But I got to thinking...I wonder how well it would work to simply modify a hand truck? Harbor Freight sells a fairly nice one for approx. $35.00 on sale. My tanks are 12.5" and 9.5" inches in diameter, and 42" and 52" tall. I'm sure I could modify a hand truck to work, but I don't know how happy I'd be with the end product. I know if I build one it will be much more heavy duty, but maybe it doesn't need to be so heavy.

What have some of you folks done? Any suggestions?

Thank you,
Glenn F.

[Log in to Reply]   [No Email]
oldhousehugger25

04-03-2008 15:58:06




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
I built my torch rack with the idea that it would spend 99% of the time up against the wall in my shop. With that in mind I said to myself why tie up a set of wheels and such when I already have several 2 wheel hand carts which are plenty sturdy enough to move the torch rack when I need to. So that being decided I took some 3/4 and 1/2 EMT and brazed together a pretty nice rack which a 2 wheel hand truck can slide under whenever I need to move it.
Works for me.

[Log in to Reply]  [No Email]
Glenn F.

04-03-2008 10:25:42




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
Thank you for all your suggestions. Last night I began gathering materials to build a cart. I think I have everything I need. I was able to get a light rear axle from a small front wheel drive car from my brother, who has an auto body shop. Axle is complete with two 13" space saver wheels.


Glenn F.



[Log in to Reply]  [No Email]
T_Bone

04-03-2008 04:04:19




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
Hi Glenn,

Those HF carts aren't too bad other than the 20" wheels won't carry the cylinder weights. What I'm going to do is buy the 10" or 13" solid rubber wheels for $5eh then the cart should be decent. The cart it's self was well made, just the wheels were too light for the weight. I couldn't make the carts for $25.

T_Bone



[Log in to Reply]  [No Email]
Pat-CT

04-02-2008 13:37:17




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
Link



[Log in to Reply]  [No Email]
dave2

04-03-2008 01:25:41




Report to Moderator
 Re: Torch Cart Options in reply to Pat-CT, 04-02-2008 13:37:17  

Pat-CT said: (quoted from post at 13:37:17 04/02/08)>Link


Looks>Link nicer than scabbing a dolly together but takes away from that personal touch :P :oops:

[Log in to Reply]  [No Email]
TIMAR

04-02-2008 11:11:43




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
If you are going to be pushing it across and uneven or rock driveways, go to a salvage yard and get 2 small spare do-nut tires and use them for the wheels. Makes the cart push very easy.



[Log in to Reply]  [No Email]
flying belgian

04-02-2008 08:04:39




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
Works fine. Thats what I did. Going on 20 years. no problem yet.



[Log in to Reply]  [No Email]
dave2

04-02-2008 07:37:13




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
my brother used an old hand truck and set the tanks side by side and strapped them w/ a ratchet strap. Bolted an old tractor tool box to the side facing tou for tips, striker, etc. Worked fine unless on rough ground when the bottom of the tanks would move around. He took a steel plate and welded a piece of scrap pipe (he probably could have bent the edges up but the scrap idea was quicker) around the edges so the tanks would set snug and bolted it to the existing HT plate. Works like a charm. That was about 30 years ago and he sent me a picture of his truck taken last summer w/ the torch cart still in his shop.

Dave

[Log in to Reply]  [No Email]
PJH

04-02-2008 07:06:29




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
I made some nice wheels for my tank cart out of 20 inch bicycle wheels. The rubber tires are easy on cords and hoses. I first tried leaving the original spokes, but found that they weren't strong enuf if you get sideways on a hillside. I cut all the spokes out and used a circle of 3/4" plywood for a wheel center, 3/4" floor flange for hubs, and 3/4" pipe for axle. I used large nuts for "bearings" for the axle, and made a "differential" by cutting the axle and welding a 3/4" rod to one side of the split axle. Roll pins keep the two halves from seperating. The skinny wheels will go thru doors easy. Not my original idea - I stole it from someone else. I wish I could post a picture - everybody likes to look at them. If you are using your torch to make a living, you probably won't have time to tinker with building one. I've seen them with motorcycle wheels and the skinny spare tires too. They are nice, but a little wider and heavier.

Have fun!

[Log in to Reply]  [No Email]
Kentb of SWMO

04-02-2008 06:17:14




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
I used a frame we had once used for a Mini-Rod pulling tractor. The frame was made from one inch equare tubing. For wheels I used a couple of the throw-away spare tires. rolls good BUT I have to keep it under 50 MPH because that is the speed limit on the tire.

Kent



[Log in to Reply]  [No Email]
glennster

04-02-2008 06:00:37




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
use a big set of wheels, i used some off a wheel barrow, big balloon type. alot easier to move the cart across rough ground. and it will go right over extension cords and air lines without snagging.



[Log in to Reply]  [No Email]
Glenn F.

04-02-2008 05:46:08




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
I did a little web searching for pictures/plans of torch carts but haven't found much yet. Do any of you know of a site which features one?

One thing, I know I've always been somewhat observant of carts when I am in different shops. Now I plan on paying even closer attention.

Thanks,
Glenn



[Log in to Reply]  [No Email]
Harold Hubbard

04-02-2008 05:07:25




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
I built mine from the ground up years ago, using iron pipe and the wheels from an old reel type push mower.

Whatever you do, seriously consider one with the cylinders lined up front to back, rather than side by side. You would not believe the number of places that side by side cylinders will NOT fit through, especially if your shop/work area is a little bit crowded.



[Log in to Reply]  [No Email]
Glenn F.

04-02-2008 05:34:01




Report to Moderator
 Re: Torch Cart Options in reply to Harold Hubbard, 04-02-2008 05:07:25  
I've seen them in the past, but never used one or looked at it closely. Wouldn't that design be rather unstable?

Glenn



[Log in to Reply]  [No Email]
CWL

04-02-2008 09:32:53




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-02-2008 05:34:01  
I've got one that has the cylinders front to back. It's great.



[Log in to Reply]  [No Email]
J.C.in AZ.

04-02-2008 03:37:49




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
My Torch Tank Cart is a Hand Truck from Menards I got 10 years ago.Both Tanks fit good on the Cart .Been useing it for a long time with no complaints.JC



[Log in to Reply]  [No Email]
big jt

04-01-2008 21:55:48




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
We have four torch carts on our place. One My dad built 35 years ago which we use to hold boards for the crib end.

One came from a blacksmith shop which is the one I use in the shop. Main thing I like about it is it has a rack for extra tips, etc that I like.

One which was made from a cart like what you are talking about. It is still active but I don't use it much cause I need to bring a bunch of stuff from another cart to make it work.

The fourth is One I made. It is more of a outdoor unit. Has a axle from a feedwagon 15 inch tires and a hitch. This thing is big so it doesn't make it into the shop much but is just the ticket for remote work. I can tow it with my Cushman or the like for near work and it tows behind a pickup at 60 mph like there is nothing back there.

Shoup has one already built that might be worth consideration. (see link)

What it really comes down to is what do you want to use it for. I would suggest that if the one Shoup has for + $170 if it would work that would be a good buy as the time spent building one will exceed that unless you just want a project for the fun of it.

Just my opinion, your milage may vary.

jt

[Log in to Reply]  [No Email]
Lee in Iowa

04-01-2008 21:45:16




Report to Moderator
 Re: Torch Cart Options in reply to Glenn F., 04-01-2008 21:08:02  
I haven't ever done it, but that's the plan if I need one again. Lee



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy