Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Electric Motors

Welcome Guest, Log in or Register
Author 
Electric Man

02-22-2008 19:03:41




Report to Moderator

I am looking for any and all electrical motors. Single and three phase. Running and dead. whole or parts. Also buying used and outdated phase convertors. All motors prefered to be 1 horsepower and larger, all voltages considered. Thanks in advance! Mike @ 513 461 9214




[Log in to Reply]   [No Email]
buickanddeere

02-24-2008 06:46:51




Report to Moderator
 Re: Electric Motors in reply to Electric Man, 02-22-2008 19:03:41  
lmao



[Log in to Reply]  [No Email]
Bob Huntress

02-23-2008 20:30:56




Report to Moderator
 Re: Electric Motors in reply to Electric Man, 02-22-2008 19:03:41  
Your advertisement, which should actually be on a different part of this site, implies that you are a collector of old motors. I too have some old motors that I am very proud of. My favorite is a Robbin Myers 3hp, that I found in a back field in Lockport, NY. It was the prime mover on an old 1928 Brunner Compressor. It is a true work of art. Though it would no doubt use far to much power to be worth using to power anything, I have no plans to sell it. It has the flat disk comm, and hinged vents and all the little things that a 110/220 volt motor should have for 1928. The data plate, actually says that it was built in 1930, so it wasn't the origanal motor on the compressor. I have the controller that went with it, but it isn't in the same great condition as the motor. Someday, when I retire from the Coast Guard, I hope to have my own shop, and I'll display my awesome motor in that shop. Just thought I'ld share that, since you seem to appreciate the old motors, as well, and this is, in my opinion, a beautifull motor.

[Log in to Reply]  [No Email]
Jon Butto

02-23-2008 19:19:34




Report to Moderator
 Re: Electric Motors in reply to Electric Man, 02-22-2008 19:03:41  
Hay Mike @5134619214; Would you be intersted in selling some of your electrical motors. Permit me to introduce my self. I am MISTER Jon Bhutto, late minister of agriculture of the great nation of nigeria. I lack about 2 tons of motors filling up a 40feet container. My brother and me are in the motor rebilding business in Lagos. How far are you from Saint Lewis; my agent there handles my business in usa. I currently owe him 3500s of american dollars. How much for 2 tons of your motors? I will send to you a check for whatevr is fare plus 3500 american dollars. You just pay my agent by Westrn Union please and keep the rest for yourself. Please post here if your interested and I will give you a phone no.

[Log in to Reply]  [No Email]
Mike @ 513 4........

02-24-2008 06:53:38




Report to Moderator
 Re: Electric Motors in reply to Jon Butto, 02-23-2008 19:19:34  
MISTER Jon Butto.....If you didnt read i am buying motors, not selling them. I am very far away from St louis. Have a good day. TO THE REST OF YOU, IF THERE WAS A PLACE FOR ELECTRICAL MOTORS IN THE CLASSIFIEDS, I WOULD BE THERE!!! GOOD DAY!!



[Log in to Reply]  [No Email]
Stanley Nobbabwatamy

02-24-2008 07:48:26




Report to Moderator
 Re: Electric Motors in reply to Mike @ 513 4........, 02-24-2008 06:53:38  
Mr. Mike 513,

Please excuse the rudeliness of my fellow countryman, Mr Johnbutto. You do well to not to do business with this man! I have on good authority that he is not who he says he is. He was only DEPUTY minister of agriculture and he will not pay you what your fine ELECTRICAL MOTORS are worth. Please send me your bank account number and SOCIAL SECURITY NUMBER and I will immediately transfer FIVE THOUSAND US DOLLARS to your account as payment in advance for your ELECTRICAL MOTORES. You may well rest reassured that these motors will be well looked after by my countrymen who are very much in need of them.

[Log in to Reply]  [No Email]
T_Bone

02-24-2008 07:29:41




Report to Moderator
 Re: Electric Motors in reply to Mike @ 513 4........, 02-24-2008 06:53:38  
Hey Mike,

B&D spoke for the forum members as we can't have commerical ads here. Just look what would happen if we did, there wouldn't be any space left for discussions.

Your ad is clearly a commerical ad and most likely your a scraper?

B&D could have not said anything and notified the moderator to remove your thread instead of trying to explain the forum rules to you, nicely. So don't get mad and YELL AT THE REST OF US BECAUSE YOU BROKE THE RULES!!!

T_Bone

[Log in to Reply]  [No Email]
guido

02-23-2008 17:51:29




Report to Moderator
 Re: Electric Motors in reply to Electric Man, 02-22-2008 19:03:41  
Hi Electric man
My purpouse is to support the other posts. I do like to take time and tell you that advertising is not part of this forum. You are welcome to participate in it for the proper content it was meant for.
Guido.



[Log in to Reply]  [No Email]
buickanddeere

02-22-2008 19:13:59




Report to Moderator
 Re: Electric Motors in reply to Electric Man, 02-22-2008 19:03:41  
Ever wonder why your post is the only classified ad in the discussion forums?
http://www.ytmag.com/cgi-bin/clasquery.pl



[Log in to Reply]  [No Email]
Electric Man

02-22-2008 19:17:49




Report to Moderator
 Re: Electric Motors in reply to buickanddeere, 02-22-2008 19:13:59  
Posted here caus no one seems to look in the classifieds for this stuff.



[Log in to Reply]  [No Email]
buickanddeere

02-22-2008 19:19:19




Report to Moderator
 Re: Electric Motors in reply to Electric Man, 02-22-2008 19:17:49  
Maybe they are not interested. Now they are also ticked off as well. Tell me that is good for business?



[Log in to Reply]  [No Email]
Electric Man

02-23-2008 10:35:28




Report to Moderator
 Re: Electric Motors in reply to buickanddeere, 02-22-2008 19:19:19  
Seems you are the only one who is ticked off>



[Log in to Reply]  [No Email]
MarkB_MI

02-23-2008 18:52:32




Report to Moderator
 Re: Electric Motors in reply to Electric Man, 02-23-2008 10:35:28  
You are incredibly thick.



[Log in to Reply]  [No Email]
Stan in Oly, WA

02-23-2008 16:14:50




Report to Moderator
 Re: Electric Motors in reply to Electric Man, 02-23-2008 10:35:28  
Hi Electric Man,

Buickanddeere may be the only one who took the time to post about this matter, but he speaks for many of us who also feel that it works better when you just follow the rules. If you don't believe that there are plenty of others who would prefer that this forum didn't become commercialized, or politicized, etc. just say so and I'm sure others will be willing to take a minute to tell you how they feel.

My purpose here is to support buickanddeere, who I agree with, and who is currently kind of out there like the Lone Ranger. I don't bear any ill will toward you, and I hope you will continue to participate in this forum. It is a good one, and the rules are sensible.

All the best, Stan

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy