TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Drop lights

Welcome Guest, Log in or Register

Author

Bob Farrell

02-18-2008 06:47:08

Report to Moderator

What kind of drop lights do you guys use (brand and model specific)? I don't see too well and get frustrated trying to use what I have. Have three or four incadescent (negatives: breaking bulbs, burning arms, light in face, etc.). Have a couple flourescent (negatives: bulky - hard to find room to position, don't seem very bright). Have not tried any LED's (any, any good ?). Flashlights (negatives: takes away one hand to concentrate light beam, dead batteries, etc.).

Have pretty good shop lights - but they shine down from ceiling - not up from floor.

Any ideas????? ?? bob farrell

[Log in to Reply] [No Email]

KJF470

02-21-2008 17:46:39

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

Are these the bulbs they call severe service or rough service?

[Log in to Reply] [No Email]

bweb

02-21-2008 14:05:39

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

They make bulbs especially for drop lights that won't burn out when you drop them. Check at your hardware store. I had them in my drop lights when I did body work for a living and they would last for a couple of years of almost daily use. Barry

[Log in to Reply] [No Email]

shannon from ohio

02-19-2008 16:26:09

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

Wait til you drop an incadescent drop light in a puddle of Gas ""(WOOF then BOOM!!)"" Not for me, I have LED Lights for the fuel tank jobs..... .

[Log in to Reply] [No Email]

Fawteen

02-18-2008 13:40:36

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

We have a rechargable multi-element LED at work. Nice and bright, and other than the cheesy plastic hangar hook on the end, I really like it. Has the "strip" of lights the long way that are really bright, plus a flashlight-style deal in the end.

Haven't had to use it over an extended period yet so can't speak to battery life.

[Log in to Reply] [No Email]

Bob Farrell

02-18-2008 11:44:27

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

Thanks to all that replied. Picked up several good hints. Will try some. Thanks !! bob f.

[Log in to Reply] [No Email]

Stan in Oly, WA

02-18-2008 10:12:47

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

Hi Bob,

Clamp lights (as already mentioned) and magnetic base lights will take care of some of the issues you raised, and provide benefits regardless of the type of bulbs (if that's still the inclusive term) you decide to use.

All the best, Stan

[Log in to Reply] [No Email]

Gary in da UP

02-18-2008 08:53:40

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

Ihad a MAC rechargeable LED lamp for about 6 months, left it hanging under my F350Awhile back I was installing a B&W gooseneck hitch. If you find it call me and I"ll send you the charger, postage paid. It is some where between Sault Ste. Marie and ST. Ignace under3 foot of snow.

[Log in to Reply] [No Email]

RobMD

02-18-2008 08:42:10

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

I'm tired of lights with cords and blowing the elements out.

[Log in to Reply] [No Email]

jdjack

02-18-2008 08:35:43

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

I have a led cord less light for snap on. Love it.
Will not get another light with a cord.
About $100.00.

[Log in to Reply] [No Email]

jose bagge

02-18-2008 08:19:52

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

all my mechanics are running the LEDs now, and I'm wearing a ball cap with 3 little LEDs built into the bill when I go out to feed the livestock in the morning. Casts a LOT of light, but makes it look kind of "night vision" like- sort of spooky and at first freaked out the horses. Great in the shop though.

Advanced Auto parts and NAPA sell just the flourescent "heads" if you have reel-style bulb trouble lights that you want to retro fit.

[Log in to Reply] [No Email]

Mattlt

02-18-2008 08:16:53

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

I use a light with a spring-type clamp on it. Helps me direct it more closely to where the light is needed. Has a shade on it like a small brooder light.

[Log in to Reply] [No Email]

Ryan - WI

02-18-2008 08:09:18

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

If you do use incandescents, an old mechanic's trick is to onlly screw in the light bulb just far enough to make it light. The bulb being loose keeps them from breaking as easily when dropped.

[Log in to Reply] [No Email]

bradk

02-18-2008 07:42:36

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

I won't allow an incadescent or bulb style in my shop.Fire hazzards.I have a few "Bounce light" fluorescent lights with re-coil.Bought it from A&I supply online.Toughest light I've ever seen.Hard to kill.

ATD makes a real good rechargable LED light.Have a few of them too.Charge lasts for something like 14 hrs.

[Log in to Reply] [No Email]

bradk

02-18-2008 07:56:11

Report to Moderator

Re: Drop lights in reply to bradk, 02-18-2008 07:42:36

I seen ebay has the Bounce light.Better price than I paid.

[Log in to Reply] [No Email]

TXFarmallFan

02-18-2008 07:18:22

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

I dont think you can go wrong with LED's. I use them at home and everyday in the shop at work with great success.

[Log in to Reply] [No Email]

IH2444

02-18-2008 07:05:29

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

I put the little squiggly florecent bulbs in my drop lights. No more burns and so far no faliures from dropping them.

[Log in to Reply] [No Email]

hansen

02-18-2008 07:01:37

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

Hey Bob,
Drop is the key word here. I'm pretty shaky and clumsy. I go through a lot of bulbs. They make a tiny LED light for camping. Mounts on your head. Pretty bright concentrated light, and light weight. Maybe that would help?

[Log in to Reply] [No Email]

Steve in Mass

02-18-2008 07:00:58

Report to Moderator

Re: Drop lights in reply to Bob Farrell, 02-18-2008 06:47:08

Bob,
I hear ya! There isn't a perfect light made, yet. I often use the flashlight that came with my cordless tool set, just to get rid of the cord - and batteries are re-chargeable. the light more focused than drop lights, too. Give one a try. I've had several - they're all about the same.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy