Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Walker Engine Crane, Long Ram Jack

Welcome Guest, Log in or Register
Author 
scott#2

01-24-2008 16:20:09




Report to Moderator

I have this old Walker engine crane that has a 54" (fully extended) Hydraulic cylinder on it. It wont work and I have it torn down and suspect silicone plugging up the passages from the last rebuild, seals look and feel good. Meanwhile I was out on the net looking for long ram jacks like Westward, Norco, and the typical cheapie units. First of all, I can't find any made in the USA and second, the longest stroke I can find is about a foot less than 54". Sure would like to buy USA, even if it costs double. Any ideas?

Thank You,

scott#2

[Log in to Reply]   [No Email]
JoeK(WI)

01-27-2008 07:49:35




Report to Moderator
 Re: Walker Engine Crane, Long Ram Jack in reply to scott#2, 01-24-2008 16:20:09  
Have you considered a separate cylinder and and pump,ie:porta power or similar?



[Log in to Reply]  [No Email]
greygoat

01-25-2008 08:03:16




Report to Moderator
 Re: Walker Engine Crane, Long Ram Jack in reply to scott#2, 01-24-2008 16:20:09  
Try Bailey"s at www.baileynet.com. you can down
load a catalog, but it"s 90 pages. order one
on the net, or at 1-800-800-1810



[Log in to Reply]  [No Email]
scott#2

01-24-2008 18:33:43




Report to Moderator
 Re: lookie here, real american stuff! in reply to scott#2, 01-24-2008 16:20:09  
Link



[Log in to Reply]  [No Email]
Mell N. Head

01-24-2008 17:31:43




Report to Moderator
 Re: Walker Engine Crane, Long Ram Jack in reply to scott#2, 01-24-2008 16:20:09  
I also have a Walker shop crane. It's only rated at 1000lb but it is one stout unit.

The jack assy has been problamatic from day one. with water getting in past the ram seals and debris loaded oil that sometimes would jack and sometimes not. I pulled the plunger and found it to have a torn cup seal on it's tip, so I fabricated a rubber one out of a cup from a small motorcycle disc brake master cylinder.

That worked real well for a short while till that tore internally and plungered rubber bits into the passageways.

I did find at least one guy on the web that works with jacks and such (it turns out Walker turned into Lincoln and what it is now I don't care) he said he would buy repair my unit or supply parts if i wanted. Or if I wanted to go another way he would purchase my old jack assy for guys like you. Look up hydraulic jack repair in google.

I went to harbor tool, dropped $30, came home, made it fit and tossed the old jack in the garbage can.

Done, and back to work.

[Log in to Reply]  [No Email]
RickL

01-24-2008 17:11:04




Report to Moderator
 Re: Walker Engine Crane, Long Ram Jack in reply to scott#2, 01-24-2008 16:20:09  
look at Bailey bearing all kinds of hyd cylinders that you can imagine,bearings pumups etc out of Tennessee



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy