Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Tire Bubble Balancer

Welcome Guest, Log in or Register
Author 
Glenn FitzGeral

01-16-2008 14:03:39




Report to Moderator

One tool I'd like to add to my shop is a bubble balancer. When buying a new set of tires I hire the mounting/balancing, but when mounting a used tire I really like to keep my cost down. I have a manual tire changer that does the job, but no balancer.

I am not an e-Bay or Craig's List shopper. Are used balancers hard to come by?....Expensive?

I haven't really looked at them, but are the Harbor Freight ones adequate/accurate?


Glenn F. (DePere, Wisconsin)

[Log in to Reply]   [No Email]
Slowpoke

01-18-2008 23:42:56




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
I bought a used Bada balancer, made in Pasadena,
Ca., probably in the 60's or 70's. Cost about $75 20 years ago. It has to be leveled before use and the slightest breeze will keep moving the tire out of balance. It uses oil as the dampening fluid. But it's the kind almost every shop used before the dynamic balancers were introduced. I guess I'm using it correctly, since it balances well, but I'd still like to find a manual for it.

I pick up lost wheel weights but those are getting scarce since everybody is using stick on weights for the expensive alloy wheels. For regular weights get a pair of tire balancing weight pliers. Try Craig's List or a supplier of service station equipment for a balancer. That way you can see what your getting and advice on using it. Don't buy one one eBay unless it's local pickup. It's too delicate to ship without proper crating and the oil must be removed.

[Log in to Reply]  [No Email]
bjr

01-17-2008 09:19:54




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
I got a Harbor Freight manual tire changer and static balancer and I like it just fine. You can buy used weights for cheap from metal salvage places, just tell them your using the as fishin' weights. I'm a do it your selfer tire guy, just really got tired of the poor service from the tire shops around here. also bought tire irons and hammers and a big slide hammer bead breaker and five gallon bucket of Murpheys tire mount soap compound. And also a Cheeta bead seater (air tank). Flats always happen on the weekends when I'm tryin' to get stuff done. bjr

[Log in to Reply]  [No Email]
jack12345

01-16-2008 20:22:06




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
For ceramic beads I found info at [www.innovativebalanceing.com]



[Log in to Reply]  [No Email]
iowa_tire_guy

01-16-2008 19:58:18




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
I use balancing beads in semi tires and have good luck with them. I have tried them now and then in smaller ones and haven't been as happy with the results. Use the beads and not the powders though because the powders tend to ball up if you inflate with moist air.



[Log in to Reply]  [No Email]
T_Bone

01-16-2008 19:07:56




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
Hi Glenn,

I use RV PG anti-freeze (pink) to balance my tires. About fluid 8oz/tire on my F350 DRW. Draw back, it's messy if you fix your own flats. Easy to replace tho and cheap. I would probably increase AF to 12oz/tire if I was going to use this method on 16" tires. I have 20k miles on the tires and 5yrs, so there's no harm to the tire.

My son bought the ceramic beads and had excellant results for 50k miles, about $15/tire that includes the install tool. Easy to vaccum out for flat repair and reuse. My son says he'll inspect the inside of the tires for damage when he puts new ones on latter this month.

Both methods provide a continious life time tire balance. The son even says his alignment has not faulted in 50k miles that goes with the claim of the bead mfg. Wheel gets slightly bent or picks up mud, rocks, etc; the tire is always balances as the beads/fluid run to the out of balance spot in the tire. No additional tire noise using either method.
I'll be switching to the ceramic beads the next tire change just incase I have a run on flats, knock on wood. I will keep the RV AF in the trailer tires tho.

I'll never go back to using lead weights for balancing tires.

T_Bone

[Log in to Reply]  [No Email]
LA in Wi.

01-16-2008 19:33:21




Report to Moderator
 Re: Tire Bubble Balancer in reply to T_Bone, 01-16-2008 19:07:56  
T Bone,
Tell me more about those beads. Where do you buy them? Cost? How do they do the balancing?
LA in WI



[Log in to Reply]  [No Email]
ericlb

01-16-2008 19:23:44




Report to Moderator
 Re: Tire Bubble Balancer in reply to T_Bone, 01-16-2008 19:07:56  
t bone, i would like to know more about this system, ive seen this avertized, but your the first one who uses it, how much do you put in a 16" wheel, i cant get the shake out of my flatbed, and it didnt shake for the last hundred thousand miles untill i had the chain store balance some tires, [ twice] i do all my own tire work for the above reason, and also do my own truck tire work too, [ 11;00 /24.5]

[Log in to Reply]  [No Email]
T_Bone

01-17-2008 06:13:29




Report to Moderator
 Re: Tire Bubble Balancer in reply to ericlb, 01-16-2008 19:23:44  
Hi Eric,

You'll need to read the website for the correct amount to add. If you add too much of any product then your tires will run out of balance at slow speed as it's to much weight to quickly distribute.

My cars 13" Goodyear tires after 25k miles would not balance with weights or fluid as the tires were bad. I had to buy new tires.

T_Bone



[Log in to Reply]  [No Email]
Flying Dollar Farm

01-16-2008 17:59:38




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
Glenn. Harbor Freight in Green Bay has them, not sure about the price now, bought one a couple years ago.



[Log in to Reply]  [No Email]
Ryan - WI

01-16-2008 17:02:44




Report to Moderator
 Re: Tire Bubble Balancer in reply to 2x4, 01-16-2008 14:03:39  

Glenn FitzGerald said: (quoted from post at 17:03:39 01/16/08) One tool I'd like to add to my shop is a bubble balancer. When buying a new set of tires I hire the mounting/balancing, but when mounting a used tire I really like to keep my cost down. I have a manual tire changer that does the job, but no balancer.
I am not an e-Bay or Craig's List shopper. Are used balancers hard to come by?....Expensive?

I haven't really looked at them, but are the Harbor Freight ones adequate/accurate?

Glenn F. (DePere, Wisconsin)


Glenn,

I teach in a small high school and this past summer I was in the market for a balancer as well. I found a spin balancer on ebay and won it with a final bid of 153 bucks. It was a pretty good deal for us. They are on craigslist every now and then and people usually ask around 700-1000 for them. If you are patient you can catch them on ebay every so often.

[Log in to Reply]  [No Email]
BobOHIO

01-16-2008 16:58:42




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
A fellow up the road from me used to bubble balance my tires and they shook every time. Spend the money and just have them spin balance the tires. I'm cheap too but some things are just worth the cost.



[Log in to Reply]  [No Email]
iowa_tire_guy

01-16-2008 16:57:13




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
At least you don't have to worry about it going out of calibration. The biggest drawback to bubble balancers is they only balance in one plane but a tire spinning on a car has the forces of 2 planes working against it. That is the theory behind spin balancers, they balance both planes. BUT you have to be trained properly to run them. We always "spin to zero" which means after the weights are on we spin again to see if it comes up balanced. Most shops, especially chains, don't bother. I have had tires come in just balanced at Walmart where the burger flipper put the weights on the heavy side of the wheel instead of the light side. I suspect this isn't too uncommon. Anyhow my point is a half of balance done correctly, or none at all is better than one done wrong, even if they have a $10,000 machine. Go get your bubble balancer and do it.

[Log in to Reply]  [No Email]
KIP in MX

01-16-2008 16:49:37




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
As some posted below, static (bubble) balancing might be okay for some applications and was done that way for many years, but it will never be as good as properly done dynamic balancing. Can you mount them yourself and pay just for the balancing?



[Log in to Reply]  [No Email]
Goose

01-16-2008 16:16:22




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
I bought one used on e-bay for something like $15. I've seen the same thing advertised elsewhere new for $110, maybe a bit less, even at HF.

Works fine. In fact, I'd never been impressed with the balance jobs I'd had done at a large chain tire store. I found out why. I took a wheel straight off their state-of-the-art electronic balancer and put it on my bubble balancer. It leaned over to one side.

I put the wheel on the front of my car and road tested it. It just didn't feel right. I re-balanced it on my bubble balancer and it was smooth as you could want. Draw your own conclusions. Either the tire store's balancer is wacky or they don't know how to use it. Probably the latter.

Part of using a bubble balancer is knowing how to use it. (Like any piece of equipment.) On a bubble balancer, if you have an imbalance that takes one ounce to bulls-eye the bubble, don't just put a one ounce weight on the spot. Put two 1/2 ounce weights together and move them apart evenly until the bubble begins to go off center. The move them back till your bulls-eyed again. On a severe imbalance, like someone else said, use four weights and put two on the back side of the wheel.

[Log in to Reply]  [No Email]
dave guest

01-16-2008 16:05:43




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
I can't even get a good balance paying for it. Bubble balancers never worked for anybody I can recall going back 45 years. Spin balance was the thing, but no longer around. Last tires I mounted myself with no weights. Perfect. Had em balanced, kid put enough lead in one spot to make fishin' sinkers fer all summer. Drove it. Shakes. Went home, peeled em all off. Perfect. Maybe you have to buy whole new car to get good balance.

[Log in to Reply]  [No Email]
John730D

01-16-2008 15:55:26




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
To properly balance a tire on a bubble balancer you need to use a minimum of four weights equally spaced. Also half of the weights need to be on the outside and half on the inside. Most tire shops don't balance tires properly because they don't properly space the weights.



[Log in to Reply]  [No Email]
timcasbolt

01-16-2008 15:28:28




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
I have a cheap one. Might have come from Harbor Freight or similar. Had it about 6 or 8 years. Works fine.



[Log in to Reply]  [No Email]
rodgernbama

01-16-2008 15:07:57




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
I used to work with a guy who sold tires on the side. He said the bubble balancers work pretty good for someone wanting to stay on a low budget.



[Log in to Reply]  [No Email]
RayP(MI)

01-16-2008 14:31:34




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
We bought a cheapie years ago. Never got it to function properly. Could not get a tire to blance out. If I got one balanced, removed it from balancer, and set it back, it wouldn't show balanced again. Finally threw it out! My suggestion, don't even fool with the cheap bubble balancers.



[Log in to Reply]  [No Email]
Maark

01-16-2008 14:25:55




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
On ebay now for $14.99 plus $10.00 shipping



[Log in to Reply]  [No Email]
Vern-MI

01-16-2008 14:20:29




Report to Moderator
 Re: Tire Bubble Balancer in reply to Glenn FitzGerald, 01-16-2008 14:03:39  
I found one at a flea market for $30. The tire platen floats on a cushion of pressurized air so there isn't any friction. I use it for smaller trailer tires as found on snowmobile and boat trailers. It isn't very good for high speed vehicle highway tires because you have to assume that the unbalance is uniform from side to side on the tire.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy