Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Waste oil works just fine for me

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
jdemaris

01-16-2008 05:33:46




Report to Moderator

I hear an awful lot of claims - and complaints about different types of bar oils.

I've been cutting wood for 40 years and have never bought "bar oil." I've been using waste motor oil with zero problems. I pour it through a paint filter once and then store it in a jug. I've never worn a chain or bar out from lack of lube. All my chains get "done" once sharpened to the point there is no chipper left. I'm still using bars that customers threw out (for the wrong reasons) 30 years ago. I heat a large house and barn with 100% wood - so I cut a lot. There many be certain saws that have non-adjustable oil pumps that need premium blends of bar oil - but I've never encountered one yet. This whole thing as I see it - is just plain silly. When I was a Stihl and Homelite mechanic back in late 1960s - and on up to the 90s - we had many part-time wood-cutters that'd buy a new bar everytime the saw cut crooked - and I'd take those bars home and use them. Still am. Now - for someone worried about oil pollution and wanting something considered biodegradable - that's a different story.

[Log in to Reply]   [No Email]
JK-NY

01-16-2008 17:49:54




Report to Moderator
 Re: Waste oil works just fine for me in reply to jdemaris, 01-16-2008 05:33:46  
I also use used motor oil for bar oil. The secret is making sure you have clean used oil(no crud or dirt mixed in). Never see any excessive wear, and never have problems with oil not pumping or plugged oiler.I usually turn up the oil flow a little more than factory setting. I used to save some used ATF for use in real cold (-10 or -20)weather but decided I'd rather not be cutting wood when its too cold for the used oil to flow well.

[Log in to Reply]  [No Email]
Joe (Wa)

01-16-2008 12:57:10




Report to Moderator
 Re: Waste oil works just fine for me in reply to jdemaris, 01-16-2008 05:33:46  
Ever wonder why you had to scrounge all those used bars, chains, and sprockets?

I agree on the old saws, my homelite 360 takes SAE 30. I bought a new Stihl 029 when they first started that bar oil minimize thing. Used less than a 1/2 cup of oil per tank of gas. Stihl dealer put in 2 new oil pumps, reamed the passages, all new relative Stihl parts. Still run hot.

Laid under the work bench for about 3 years until I got motivated, put in a new pump, filed down the adjust stop for more oil, new stihl bar, prestressed chain, sprocket & bar oil. Now using almost a 1/2 tank oil per gas tank. Got it right? About an hour of bucking fir, bar starts running hot. Take the bar off, cleanup, turn over, get about another hour same thing. I am not pulling the bar off any saw every hour, keep on bucking, do or die. Bar turned blue, chain hot and stretched, jumped off the bar. I flung it down the hill in the brush as far as I could throw it.

Still there as far as I know. Locals stop by ask for permission to hunt through my property. A lot of these guys are former or part time loggers that use these little saws for limbing.

I tell them about the saw and they can have it if they happen to run across it.

Them: What kinda saw?

Me: 2001 Stihl 029.

Them: Thanks anyway, ain't worth carrying out of there.

Me: I hear ya.

Maybe some cityslicker will hunt through, find and steal it someday.

Joe

[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy