Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Camshaft?

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
jdemaris

01-01-2008 08:23:37




Report to Moderator

I used to have a a SS 396 Camaro. I blew the engine and got a good buy on a brand new, truck-version 427 - which is basically just a bigger version of the 366. I got it bolted in OK with a few mods, but it was a dog. Very low compression, and a very mild camshaft. Ran like a 2 barrel 348 powerwise but used fuel like a HP 396. It was a learning experience. I tried to buy a hot cam for it - and found out the truck-version engine uses a gear-driven cam that turns reverse-rotation from a car-version 396 or 427. I finally got rid of it and got a 389 powered 1965 GTO instead, which I quickly blew to pieces. At the time, just about everybody (Chevy lovers, that is) wanted a big-block Chevy. After jerking around with many 265-283-327 SBs, and 348-409s, the "new mystery" engine sounded interesting.
Back in 1963 Chevy built a handfull of special Nascar 427s and won at Daytona. It was a different 427 than the later version (how different, I'm not sure). It's the rarest Chevy V8 ever made, as far as I know. According to GM, it was the prototype to the later 396. It shared design traits of the standard 427 and also the 409.

My friend owned a Z28 Camaro with a 302 - I picked it up with him new when he got back from Viet Nam. I think it was only offered for 1 or 2 years. I had the SS 396 Camaro with the factory installed big-block. His 302 Z28 didn't have the low end torque mine did, but overall, was a much better driver. The low end torque in the Camaro was kind of useless since it could sit there and burn rubber until the back tires came off. The 302, as I recall was a rare bird since it was one of few production engines that conformed with Trans Am racing rules and the cubic inch limitations. Ford did it too with the Boss 302.
The Chevy 302 was basically a 327 block with a 283 crankshaft, cast in high nickel, with special heads, solid lifters, high-plane intake, etc. In regard to BBs versus SBs? 396s were great engines in bigger cars - but not great in Camaros.
I'd still take a 283 or 327 over any of them. My 65 Chevelle still has it's original 327 and it's a great runner - although a fuel hog by today's standards.

[Log in to Reply]   [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy