Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Stihl problem

Welcome Guest, Log in or Register
Author 
Jimdril

10-29-2007 18:07:11




Report to Moderator

I bought a brand new Stihl 250 chainsaw to replace an 025 I"d had for many years which ran great til I ran over it with the bushhog. Right off the bat I couldn"t start it, The pull rope seemed to hangup and pulled like a bear. I took it back to the dealer who got it started and I cut one tank full, worked fine. Next morning wouldn"t start, back to the dealer, he put a new carb on. Took it home, started on the first pull, cut for 10 minutes and the idle started acting up. Saw quit and wouldn't restart. I took it back and got my money back. I"d like anew stihl but am really gunshy after this. Is this common with the new<250"s? I saw a Huskavarna in Farm and Fleet and wondered how these are. Is stihl quality slipping?

[Log in to Reply]   [No Email]
MRA

11-18-2007 10:22:36




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
I have been Stihl dealer for 34 years. Here are a few hints for the MS250 saw. Use the Stihl engine oil and fresh fuel. Once mixed it is good for 90 days, there is a fuel stablizer in their oil.The engines are very tight in the 250. When I put a new one together I remove the chain, and do not put bar oil in it to save a BIG mess.I have a log with a slot cut out to slide the bar in. Make sure the chain brake is OFF or you will ruin the PTO side and oiler,etc. Run the saw at fast idle for about 20 minutes. Do not just have it on the ground or in a box-it must have air to cool the engine. Let the saw cool off and grease the clutch bearing, refill the fuel mix and install the chain. Fill the oil tank and you are ready to cut wood. When the engine is cold NEVER pull it over more than five times with the choke on to keep it from flooding. Your dealer can set the carb with a tachometer so you have the proper carb adjustments. They also can get the safety gear you need, a pair of chaps is the smart way to go. Keep in mind the chain brake is sensitive and never try to cut with the brake engaged. Also stay away from the TIP of the bar to reduce kickback. Your Stihl dealer can sell you a RAPID-SUPER chain if you want to want to throw out the big chips. Make sure you understand that is a commercial chain and it does not have reduced kick-back features. Have your dealer explain that to you, so you will be using it properly. Also refer to your owners manual for the right way to remove the air filter. If you remove it with a screwdriver it will be ruined. You should get many years of use from this model,remember to keep the saw clean and sharp, and use fresh fuel. If you have any questions contact your local Stihl dealership.

[Log in to Reply]  [No Email]
Spritzer

11-05-2007 06:12:20




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
Bought a new Echo 16" chainsaw in '84. Am on the third chain, and the second chain bar. Original spark plug. Have kept air filter clean, saw sharpened, and proper tension on chain, Stihl bar chain oil, and gas with NO ethanol. I use enough firewood for primary heat the past 20 yrs. Saw has never failed to start and has excellent compression.



[Log in to Reply]  [No Email]
Kajun

11-02-2007 10:56:30




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
Agree Stihl is overrated. Nothing but trrouble with my 034.

For those with hard startng problems , suggest you pull off air cleaner, if so equipped, and be sure choke is really choking. On mine the plastic linkage will not allow full choke. Must get to choke and hand engage. Starts great with hot engine.



[Log in to Reply]  [No Email]
johndeeregene

11-01-2007 21:13:57




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
you arent the only one having problems with the stihl ms 250 bought a new one to use for the smaller jobs here on the farm. instead of the 24 in john deere, best saw ever built. back to the junk stihl, have had it back to the dealer 3 times with hard starting or most times not starting at all. it wouldnt bother me so much if it wasnt 40 each way to the dealer. will not buy another one. just my 2 cents worth
johndeeregene

[Log in to Reply]  [No Email]
garyh

10-31-2007 10:11:30




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
It sounds to me that you have a good dealer which is very important ! I would try another stihl , I have a lot of stihl tools and overall think they are hard to beat. gh



[Log in to Reply]  [No Email]
bunghammer

10-30-2007 19:58:38




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
My dad cut many loads of wood with his old school 610 Mac. He used it until it finally just wore out and you could no longer get parts for it. It was a dam good saw he never had a lick of trouble with it. He replaced it with a shindawa 465 and it cuts good, but it is alot heavier then the old mac was.



[Log in to Reply]  [No Email]
woodbutcher

10-30-2007 18:10:12




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
I bought a new Stihl 250 when I retired in 2004. I had used my 031 for 25 years, so I passed it down to my son. The only problem I've had is overchoking. I've learned to choke it only on the first start of the day. Then it starts with full throttle only.
Butch



[Log in to Reply]  [No Email]
FarmallJoe

10-30-2007 13:58:49




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
A lot of the new stuff is garbage but check out Shindaiwa. Yea I know its Japaniese but its one hell of a saw. I've had Huskies, and craftsmans, but the shindaiwa has been the best!!. So easy to maintaine. The husky leaks gas everytime you fill it. When you clean the air filter things fall outa place. The shindaiwa is simple as anything, runs beautiful GREAT SAW.

find a friend with one or try one out. DONT take my word for it.

[Log in to Reply]  [No Email]
Mike M

10-30-2007 11:26:50




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
Sounds like the new stuff is all junk ? Shop ebay and find a good used one just like the one you had. I have an older Stihl 032 ? and it sounds like I better hang onto it.



[Log in to Reply]  [No Email]
ms361GUY

10-30-2007 09:31:40




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
This may sound stupid, but my dad had the same problem with an MS260. Turns out that the saw was built new wiht a Bosch spark plug. Put in a new NGK plug and has had no problems since.



[Log in to Reply]  [No Email]
Bill in IL

10-30-2007 07:32:30




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
I have had a stihl 260 as my only saw for 4-5 years now. I also own a fs46 weedeater and I have noticed both motors are very picky about what fuel you put in. Don't let your mix gas get older than about a month and you will notice improvement in how your saw runs. Dealer told me to keep the tanks full when not in use and dump it out and refill with fresh gas when ready to use.... anyone else heard this? When the mix gets old I just dump it in the tractor and mix new. The dealer also told me the newer saws have smaller jets to run leaner and help with emissions thats why the new ones are more fussy on having fresh fuel.

I think I might try an echo or husky in my next saw but I would like to try one first everyone uses them different so one saw is not for everyone.

[Log in to Reply]  [No Email]
BENJAMIN KIMM

10-30-2007 07:51:11




Report to Moderator
 Re: Stihl problem in reply to Bill in IL, 10-30-2007 07:32:30  
Shihls are very picky on fuel. Run only premimum gas in them. Husq. are just as bad but they are even more cold blooded. and it is because of new emissions laws. I have a 455 rancher and its a great saw, but id take stihls any day over it.



[Log in to Reply]  [No Email]
randy47

10-30-2007 07:15:41




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
I sell husqvarna, stihl and jonsered saws for a living I would much rather a ms250 stihl than a small huqvarna (340 345 or 350) we dont even sell them because of crank bearing issues .You must have just got a bad stihl. after all it is just a mchine and PEOPLE still put them together. give the dealer another chance and try another ms250



[Log in to Reply]  [No Email]
jokers

10-31-2007 09:30:58




Report to Moderator
 Re: Stihl problem in reply to randy47, 10-30-2007 07:15:41  
"I sell husqvarna, stihl and jonsered saws for a living I would much rather a ms250 stihl than a small huqvarna (340 345 or 350) we dont even sell them because of crank bearing issues."

That was true to some limited extent but that problem was corrected quite a while ago.



[Log in to Reply]  [No Email]
rb/ct

10-30-2007 05:56:08




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
I'd try changing the gas to super premium. all my motors I run out of gas when done because of the Etahnol in the gas which will eat rubber. Although if the dealer changed the carb he put different gas in it. sometimes these problems break in or work out.



[Log in to Reply]  [No Email]
T_Bone

10-30-2007 16:43:49




Report to Moderator
 Re: Stihl problem in reply to rb/ct, 10-30-2007 05:56:08  
Hi rb,

I agree as I also run a higher grade gas like the book recomends and I haven't had one problem with my 2yo MS361 starting and that's with me forgetting to dump the fuel at years end.

T_Bone



[Log in to Reply]  [No Email]
Hotflashjr

10-30-2007 04:47:20




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
I have a Jonsered, which is basically a Husqvarna. This is the best saw I have ever owned. I used to do forestry and we only ran Sithl 046 Magnums with 20" bars and although they didn't give us a lot of issues, they were not as good as this Jonsered. Mine sits all summer and starts right up in the fall when it's time for firewood. Parts are reasonable when compared to others as well. The saw is light, has plenty of power, and just works well. I would assume the Husqvarna's are just as good and you would be happy with one of those as well.

[Log in to Reply]  [No Email]
Ry

10-29-2007 20:09:23




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
I think the quality of all the smaller saws is slipping no matter what brand. I did get a Stihl ms 210 14" bar a year ago for some carving work and I will say it has been good to me.



[Log in to Reply]  [No Email]
TomTex

10-29-2007 19:41:25




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
Buy yourself an Echo, and don't look back. Tom



[Log in to Reply]  [No Email]
K.W. in Tx

10-29-2007 20:29:40




Report to Moderator
 Re: Stihl problem in reply to TomTex, 10-29-2007 19:41:25  
Toms right those echos run forever. you can let one set for a year and it'll fire right up everytime. wouldnt own nothing else.



[Log in to Reply]  [No Email]
jokers

10-29-2007 19:10:17




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
I wouldn`t say that your experience with your 250 is indicative of recent Stihl quality, even though the 250 is a consumer saw, it`s one of the best ones you can get. I`d give them another try if I was a dyed in the wool Stihl guy.

I wouldn`t buy one of the smaller Huskies, say anything less than a 340, and if I were seriously thinking of buying from a place like Farm and Fleet, who isn`t excatly a saw shop, I would scour the internet for the best deal I could get, afterall, why pay up front for service you won`t get from Farm and Fleet?

Husky has the Crown Commitment, a 15 day money back gaurantee if you are not satisfied.

[Log in to Reply]  [No Email]
CHinNY

10-29-2007 18:52:44




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
Bought what i thought was the best weed wacker i could buy . Stihl almost $500. Hard starting Took it back ,they put in a electric control...little latter wouldn't start took it back... Head Gasket...little latter same thing...New head,piston and jug....little later back for the same thing piston,head and jug...all this on the first 2 1/2 gals of fuel !!! I will say that is running fine now and i'm on my third 2 1/2 gallons of fuel. I was getting pretty up set went most of the summer without a weed wacker... I would think twice before i bought another stihl.

[Log in to Reply]  [No Email]
Robert Searcy

10-29-2007 18:47:21




Report to Moderator
 Re: Stihl problem in reply to Jimdril, 10-29-2007 18:07:11  
Well, someone correct me if I am wrong here but yes there are 3 grades of stihls now unlike when they first hit the market here. A 25 y/o farm boss is made with a metal case whereas the new 250 you bought is the lower end consumer grade saw with a plastic housing.

My local stihl dealer explained to me 2 yrs ago when I bought a new one that they had to compete with teh poulans and sears stuff as well as still have their tried and true saws.

The professional series are the metal case units like the older ones. I will say that I bought a 260 and it ran three tanks of gas and quit. I took it back, they tore it all apart and I said UH, i either want my money back or a new one, they gave me a new one and i absolutely love it, it runs like a scalded dawg even with the 20" bar/chain i added due to some larger trees i had to take down. I have a neighbor that loves his husquvarna or however you spell it. I am just partial to my Stihls.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy