Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Where to get parts for old chainsaws?

Welcome Guest, Log in or Register
Author 
Ry

09-30-2007 15:27:40




Report to Moderator

Does anyone have a source for old chainsaw parts? For old David Bradleys, Clintons, Homelites etc. Esp. replacement chains - The links on the chains are about 1/2 inch apart. And also carb parts for the David Bradley. My local Stihl-Shindiawa dealer is of no help. He says nothing is available. I think he is too lazy to look.




[Log in to Reply]   [No Email]
Slowpoke

10-12-2007 18:05:17




Report to Moderator
 Re: Where to get parts for old chainsaws? in reply to Ry, 09-30-2007 15:27:40  
Try this: Arboristsite.com. Chain saw collectors have a forum there.



[Log in to Reply]  [No Email]
Nod

09-30-2007 20:14:54




Report to Moderator
 Re: Where to get parts for old chainsaws? in reply to Ry, 09-30-2007 15:27:40  
I found this site as one of the best for older saws
http://www.acresinternet.com/cscc.nsf?OpenDatabase



[Log in to Reply]  [No Email]
jdemaris

09-30-2007 18:48:41




Report to Moderator
 Re: Where to get parts for old chainsaws? in reply to Ry, 09-30-2007 15:27:40  
There are many places to get parts. Much depends on what make of saw you're working on - since many places specialize on just on brand or two. For example, a guy near me specializes in McCulloch and buys up old parts inventories from all over the world.

In regard to saw chain - if what other posters have said is true - I'm real surprised - especially with 1/2 chain. I've still got almost a full reel of it - but can't say I've tried to buy any in awhile. But, last I heard - recently - several makers still sell it as professional chain including Oregon. 1/2 chain is part # 10L, .063" gauge and Oregon 3/4" chain is part # 11H and .122" gauge. 9/16" chain however, was scarce even back 30 years ago. I used to work as a Homelite and Stihl mechanic back in the late 1960s. Many if not most of the gear-drive Homelites used 1/2 chain and a few used 9/16" or 3/4" chain. I've got a couple dozen old 3/4 chains hanging on the wall. You can find parts for just about any old saw. Some easier than others, and many cheaper saws used Lauson-Power-Products engines - same as many lawn mowers. If you email me, I can send you some links to places to find parts. This forum deletes posts with links.

[Log in to Reply]  [No Email]
Butch(OH)

10-01-2007 10:10:27




Report to Moderator
 Re: Where to get parts for old chainsaws? in reply to jdemaris, 09-30-2007 18:48:41  
Well, get ready to be very suprized as NOBODY currently makes 1/2" 063 chain and none has been made or generaly available for more than a few years, I didnt bother to find an exact date as it makes no differance. What I said is easily enough checked out with a call or Email to Oregon, Carlton or Stihl. 3/4" chain is current standard for mechanical harvestors and is made by all above mentioned. Past all that, I have been collecting old saws and am interested a few loops of that 1/2 063 chain you have for some of them. If you are interested in selling some loops please shoot me an email.

[Log in to Reply]  [No Email]
Dusty MI

09-30-2007 18:09:59




Report to Moderator
 Re: Where to get parts for old chainsaws? in reply to Ry, 09-30-2007 15:27:40  
I have a Clinton from the mid to late '50s. I haven't used it for maybe 15 years.

Dusty



[Log in to Reply]  [No Email]
Gene Davis (GA)

09-30-2007 18:27:36




Report to Moderator
 Re: Where to get parts for old chainsaws? in reply to Dusty MI, 09-30-2007 18:09:59  
Engine parts for Clinton occasionally show up on E-bay. Never see any of the parts for the frame or the oddball 45 degree mounted Tilliston carburetor if you have that. Rotary Mower Parts Co.in Glenville, Ga. stocks a lot of ignition and carburetor parts for older engines.



[Log in to Reply]  [No Email]
Butch(OH)

09-30-2007 17:18:53




Report to Moderator
 Re: Where to get parts for old chainsaws? in reply to Ry, 09-30-2007 15:27:40  
While I dont know your dealer from snoz he is right about the 1/2"pitch chain for your Bradley. Nobody is making it, and nobody has it, at least nobody known to the race saw people. The few loops and rolls that show on ebay go sky high to the unlimited saw racers. Scrounging Ebay, saw shops etc might be fruitful.



[Log in to Reply]  [No Email]
havvey

09-30-2007 16:58:19




Report to Moderator
 Re: Where to get parts for old chainsaws? in reply to Ry, 09-30-2007 15:27:40  
There is a chainsaw forum or 2 on line. ebay is a great place to look. unfortunatly those are ones we do not carry or do much with.



[Log in to Reply]  [No Email]
Gerald J.

09-30-2007 16:22:01




Report to Moderator
 Re: Where to get parts for old chainsaws? in reply to Ry, 09-30-2007 15:27:40  
The Oregon company makes chains and such accessories.

A few places keep more or less common carburetors and parts, but many makers have abandoned product support. That has happened much faster when a brand name has been sold a few times.

Google by chainsaw make and model.

Sometimes old chainsaws sell for a lot more than their worth at farm auctions when they sell for 2 bits.

Gerald J.



[Log in to Reply]  [No Email]
Ry

09-30-2007 17:05:57




Report to Moderator
 Re: Where to get parts for old chainsaws? in reply to Gerald J., 09-30-2007 16:22:01  
I know I might be kind of crazy for wanting to fix up these old saws but I just like using old stuff. These big old saws do work good for cutting off big tree trunks. The David Bradley has a 30 inch bar- the Homelite has a 36 inch bar. And monster cutting chains - much larger links than newer saws. I used the David Bradley yesterday to cut down some large trees. But the chain is about wore out- can not be sharpened again. It cuts real good when it runs good but engine dies every once in a while. Starts right back up. I did clean the filter and replace the fuel line but it did not help. Just like to preserve and use the old stuff I guess.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy