Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Air compressor

Welcome Guest, Log in or Register
Author 
Goldtop

06-15-2001 19:00:23




Report to Moderator

After much shopping, I've discovered that buying a compressor is much like buying a used car, heh. I hear great things about Champion, and I hear a lot of discussion on Campell-Hausfeld. Looking at two units: a Campbell-Hausfeld HS7815, and a Champion (Air-On-Line) 6.5V80E. Both are 80 gallon, 175 PSI, 220V units delivering roughly the same volume of air. About the same price too. Anybody know anything about them? The Champion is not an "R" series piece... its a new economy unit. Need help if anybody knows anything.

[Log in to Reply]   [No Email]
DumOLeBob

06-19-2001 12:01:04




Report to Moderator
 Re: air compressor in reply to Goldtop, 06-15-2001 19:00:23  
For everything you or anyone else ever want to know about air compressors go to this site: Link



[Log in to Reply]  [No Email]
John

06-21-2001 22:42:04




Report to Moderator
 Re: Re: air compressor in reply to DumOLeBob, 06-19-2001 12:01:04  
The Sullair 25-100 is a bit of overkill for a hobbyist. App 470 CFM at 120 psi.



[Log in to Reply]  [No Email]
Chris Vangel

06-18-2001 16:17:06




Report to Moderator
 Re: air compressor in reply to Goldtop, 06-15-2001 19:00:23  
All I know for sure it the Craftsman 80 gallon I have bolted to the floor in my garage here at home is the noisiest thing I have ever heard! Direct drive 6 1/2 horse, 220 volt, and it sounds like there's a Cessna Airplane running at 10,000 Rpm's in my garage. I can't wait for it to wear out so I can get a nice, quiet, belt drive unit. Hope it helps, just my 2 cents worth.
Chris.



[Log in to Reply]  [No Email]
Mark Kw

06-19-2001 08:35:03




Report to Moderator
 Re: Re: air compressor in reply to Chris Vangel, 06-18-2001 16:17:06  
I think Champion has fallen prey to the bean counters just like so many other companies have done.

While the compressor side of my Champion engine drive is fine, the Kohler engine leaves a lot to be desired. It is very hard starting even though Champion and Kohler both brag endlessly about it's "easy starting" in the sales fliers.

From my personal experience, as of this time, I can only endorse one brand with confidence and that's Quincy. Like I said in the first reply, my Coleman is running fine but I have also heard horror stories about these too.

I don't have a lot of personal experience with the Campbell Hausfeld stuff but have not heard anyone complaining about them either. In the case of equipment like this, no news is good news. I don't have proof positive but I understand that Campbell builds the Craftsman compressors too. I don't know how true this is but I see a lot of old C-man's out there chugging away for many years.

One other note, the loud compressors don't have to do with if they are belt drive or not, it's wether they are oilless or standard oil bath type. The oilless or oil free are very loud and will drive you insane in a few minutes of listening to them, especially if you're in the same county as the one running. I just passed off a 60 gallon C-man oilless that looked like new and sold at auction for $25....I suppose nobody else wanted to listen to it either?

[Log in to Reply]  [No Email]
Goldtop

06-18-2001 16:07:23




Report to Moderator
 Re: air compressor in reply to Goldtop, 06-15-2001 19:00:23  
I appreciate the inputs. I'm leaning towards the Campbell-Hausfeld unit, but only because I can't get information on the Champion model I mentioned. Its only being sold (model 6.5V80E) through their Air-On-Line.com site. The specifications on the unit look like anything else sold in this $750 - $900 price range. I've e-mailed back and forth several times now with Champion, and they can't tell me how many hours I can expect to get before a rebuild - its very frustrating. Has something happened to the Champion name or what? I thought these guys were one of the best.

[Log in to Reply]  [No Email]
John

06-17-2001 19:29:43




Report to Moderator
 Re: air compressor in reply to Goldtop, 06-15-2001 19:00:23  
When it comes to compressors, I have always liked the Campell-Hausfeld. They have made Sears units. Since I have never had any problems with either of my units, I cannot tell you about part availability. My small unit is 25 years old tne larger is 20.



[Log in to Reply]  [No Email]
Franz

06-15-2001 20:47:42




Report to Moderator
 Re: air compressor in reply to Goldtop, 06-15-2001 19:00:23  
I have a Champion that's been running for 20 years +, and haven't bothered to look at a new machine since I put it on line. It's all cast iron, and turns around 1200 rpm with a real 5hp 3 phase motor.
All of the new cheapies are junk, they travel too fast and run way too hot.
All of that said, if you're looking for a machine that will run every day, and provide you air to run your shop, go with a good cast iron machine, and take care of it. Mine has an outside air intake, mainly to minimize noise, and give the machine good clean air to compress.
If you just want a machine to blow up the occasional tire, buy a cheapie, knowing it won't last, and you'll have to replace it. Whatever you do, REMEMBER, the biggest part of cost for compressed air is the energy it will take to make it.
Depending on your location, you may be able to find an old machine with plenty of life left in it for little money. I usually find at least 3 a year in auctions, and make a few bucks on them selling them to new homes.

[Log in to Reply]  [No Email]
Mark Kw

06-16-2001 04:39:52




Report to Moderator
 Re: Re: air compressor in reply to Franz, 06-15-2001 20:47:42  
All cast iron heads are not necessary to make a good compressor. I have a Coleman 60 gallon w/ cast iron liners that got used hard for about 6 years in my shop as the primary and is still running fine as the low volume machine. I do change the oil every 6-8 months and use only Valvoline synthetic.

On the heavy duty side, I have an engine drive Champion 17 cfm @ 175 psi also with aluminum heads and cast iron liners that got run at full output for 98% of it's now 1700+ hours with no problems. Of course I change the oil in this one every 60 hours and use only the recommended Champion aircompressor oil.

Even some of the very high volume screw drive units are going to aluminum housings with cast iron liners to aid in heat transfer. As long as it is done correctly, there is no problem with it.

[Log in to Reply]  [No Email]
Mark Kw

06-15-2001 20:22:09




Report to Moderator
 Re: air compressor in reply to Goldtop, 06-15-2001 19:00:23  
I have not seen the newer Champion's but from what I hear, there are now cheapie models that are much the same as the other brands like Campbell and BlackMax.

I don't know much about any of these but what you should look for is cast iron cylinder liners and a good splash lube system because none of these cheap ones come with pressure lube.

If you're looking for price/quality, I'd take a look at Quincy. I don't know how their smaller equipment stacks up against the rest but their industrial machines are quite impressive for the prices when compared with I-R and Champion. I was beyond PO'ed at I-R after my last experience with a new unit that was absolute junk and priced at $9500. After getting no responce from either the dealer or corporate, I made the dealer come and remove the unit and replaced it with a Quincy that was bigger in size and volume yet priced $2300 less. Almost a year gone by now and the dealer still calls at least once a month to make sure we are happy with the unit. They even sent a service guy by after two months to do a free service on it. Can't ask for better customer relations than that.

Sailor-Beal are also supposed to be very good machines and competatively priced however, I have no direct personal experience with them. I did read over their books and have gotten very positive feed back from a few others who own or work around them.

[Log in to Reply]  [No Email]
Greaseman

06-17-2001 16:31:04




Report to Moderator
 Re: Re: air compressor in reply to Mark Kw, 06-15-2001 20:22:09  
I will go with all the others as far as getting an oilsump unit, I have a direct drive and it is noisy. I think I get shell shock when I don't expect it to start up and it does. Plus, I havn't got it perminantly set up and it vibrates its wheels,etc. all over the garage; it's a good unit for small jobs (tires, etc.) but not for real work. I'm planning to go with the big one from Lowe's" which will be wired 220 Volt. Then I'm going to have an auxillary tank in the other building for the rest of the family to use if I'm busy.

[Log in to Reply]  [No Email]
Dan G/Soganofla

06-19-2001 12:20:07




Report to Moderator
 Re: Re: Re: air compressor in reply to Greaseman, 06-17-2001 16:31:04  
You might want to check Home Depot if that option is available to you. I started to buy mine from Lowes, but found a better deal at HD. They have a service agreement with a very good local shop for all warranty work, but Lowe's has to ship them out. I don't expect to need warranty work, but it's nice to know I wouldn't have to do without it for 6 weeks, if I do. The quality of the HD unit seemed better, also.

Ditto what everybody else said about the oil sump units. I'd rather have a bicycle pump than one of them noisy oilless jobbies.

[Log in to Reply]  [No Email]
Goldtop

06-19-2001 16:02:49




Report to Moderator
 Re: Re: Re: Re: air compressor in reply to Dan G/Soganofla, 06-19-2001 12:20:07  
The Home Depot units (Husky Air Compressor) are "nameplated" Campbell-Hausfeld units. They carry two models, and refuse to order anything else. No Home Depot store has the 80gal. version (HS7815), and none would order it - had them check the three nearest states, heh.



[Log in to Reply]  [No Email]
LarryG

06-21-2001 04:40:16




Report to Moderator
 Re: Re: Re: Re: Re: air compressor in reply to Goldtop, 06-19-2001 16:02:49  
I bought a Pro Air (DeVilbiss) unit from HD for around $800 (less 10% because I opened a HD charge) - 6.5 hp, 80 gal, 220 V. I don't have much time on it, but I sure fell in love with it when I needed to get rid of some bolders in 2 post holes I was digging - attached my I-R chisel and they were gone in no time. That offsets the looks I get from the bride when it fires off in the garage under the living room! I can't believe how it shakes the garage floor.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy