Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Torque Multiplier photo #3

Welcome Guest, Log in or Register
Author 
KIP in MX

06-23-2007 11:17:04




Report to Moderator

third party imageLink loading="auto" style="width:auto;height:auto">">Link

Here, multiplier is installed and being used to torque mast nut to 750 ft lbs. Fixture reacts on four studs on rotor yoke, eliminating need for reaction bar.




[Log in to Reply]   [No Email]
Oldmax

06-27-2007 10:27:47




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to KIP in MX, 06-23-2007 11:17:04  
I believe the record for a chopper is about 256 MPH set years ago . When the end an aircraft prop reaches the speed of sound strange things happen like they explode on WW-2 fighters that was some where in the range of 2300 to 2500 RPM that is the reason for varable pitch props . Given the lenght of a choppers Blades the RPM would be much lower . And thats form an old aircraft mech .



[Log in to Reply]  [No Email]
Spook

06-24-2007 17:44:53




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to KIP in MX, 06-23-2007 11:17:04  
Do you work for a Mexican company? Or a Mexican division of an American company. Just curious.



[Log in to Reply]  [No Email]
Bill in Colo

06-24-2007 15:58:39




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to KIP in MX, 06-23-2007 11:17:04  
I picked up one of the old style at the property disposal at Ft Sill,back in 68 while I was stationed there 300 in 1000 out. 3/4 drive in and out. Have used it most every year since. best $5.00 ever spent on a tool



[Log in to Reply]  [No Email]
Davis In SC

06-23-2007 18:30:28




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to KIP in MX, 06-23-2007 11:17:04  
What is the ratio on that multiplier?



[Log in to Reply]  [No Email]
KIP in MX

06-24-2007 10:21:41




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to Davis In SC, 06-23-2007 18:30:28  
6.25 ft lb input and 750 ft lb output. Guess that makes it 120:1 When you spin the crank, you can hardly see the output moving. It has a hydraulic bellows inside that runs the torque gauge and is accurate withing 2%. I don�t know the cost, but it looks real expensive! It sure beats having a 3/4" drive Snap-On torque wrench and not much room on top of machine.



[Log in to Reply]  [No Email]
Roy Suomi

06-23-2007 12:56:07




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to KIP in MX, 06-23-2007 11:17:04  
Hey buickanddeere...Whens the last time you torqued 850 lbs.???? I broke my 1000 pounder now I have to use my 600 pounder with a torque multiplier...Lord , I gettin' too old for this stuff.....



[Log in to Reply]  [No Email]
Roy Suomi

06-24-2007 11:49:19




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to Roy Suomi, 06-23-2007 12:56:07  
I had a job call for more torque than I could deliver..Instructions said to , " Tighten bolt till it breaks off , then back it off half a turn".....



[Log in to Reply]  [No Email]
Jim in N M

06-23-2007 13:06:39




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to Roy Suomi, 06-23-2007 12:56:07  
Shucks, I just pull'er down tight and than give'r three full turns. The heck with a torque wrench ! Jim in N MM



[Log in to Reply]  [No Email]
buickanddeere

06-23-2007 11:34:44




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to KIP in MX, 06-23-2007 11:17:04  
In the good old days when men were men, we just give er a pull with an open and box end wrench.None of that thar new fangled fancy stuff that costs good money and just breaks down. What has this country come to?



[Log in to Reply]  [No Email]
Ross

06-23-2007 15:20:33




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to buickanddeere, 06-23-2007 11:34:44  
Yeah, I want to ride in a helicopter where some guy used a open ended wrench to put on the rotor. I mean hey, when the thing spinning oh I don't know what at least 6,000 rpm's and I'm a couple thousand feet in the air close is close enough. Right?



[Log in to Reply]  [No Email]
buickanddeere

06-23-2007 16:55:41




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to Ross, 06-23-2007 15:20:33  
It was all supposed to be humour. By the way the rotor blade spins no where near 6000rpm. The tip speed has to stay subsonic even when the leading edge has an extra 150mph due to the choppers air speed.



[Log in to Reply]  [No Email]
paul

06-24-2007 20:32:45




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to buickanddeere, 06-23-2007 16:55:41  
Which is why they are typically limited to the 150mph range I believe....

--->Paul



[Log in to Reply]  [No Email]
L.C.Gray

06-24-2007 06:36:59




Report to Moderator
 Re: Torque Multiplier photo #3 in reply to buickanddeere, 06-23-2007 16:55:41  
As the boy wonder would have put it, "HOLY RETREATING BLADE STALL BATMAN...."



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy