Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Steel Building Value

Welcome Guest, Log in or Register
Author 
Tim B from MA

04-28-2007 09:43:48




Report to Moderator

I am looking for opinions on the value of a a steel building I am going to look at this afternoon. It is the P-model from American SteelSpan - see attached web site.

It is 25 X 35 X13.5 high, don't know about accessories (doors and all). Supposed to be "new in the boxes" he is asking $4500

I submitted a request for a quote from American SteelSpan so I can compare $4500 to a new building - but I doubt they will get back to me today.

Sounds like a good deal to me, but I have never shopped for steel buildings so looking for opinions.

Thanks,
Tim

[Log in to Reply]   [No Email]
Tim B from MA

04-30-2007 09:31:40




Report to Moderator
 Re: Steel Building Value in reply to Tim B from MA, 04-28-2007 09:43:48  
Thanks for the replys guys.

Assuming it was engineered for New England weather, I think the building was actually a very good deal @ $4500, but I did not go for it because it was too ugly for my yard!

Basically, these are galvanized quanset huts with a chine on either side to have more the shape of a standard building.

If I were planning to put it somewhere where you would mostly see the front (which I would probably have stick-built to look more like a regular building), I might have considered it. But where I want may garage/barn you will be looking at the side of the building.

But it was all there in neat stakes and he had all the manuals and paper work. REal nice guy too (cold beer on tap!).

Anyone interested it is on craigslist in Rhode Island under tools or farm & garden.

[Log in to Reply]  [No Email]
TomTX

04-29-2007 05:55:10




Report to Moderator
 Re: Steel Building Value in reply to Tim B from MA, 04-28-2007 09:43:48  
Does the seller have all the paperwork; drawings, specs, foundation instructions, detailed assembly instructions? If not, does he have some kind of identifying number that you could use to get info from the manufacturer? If both questions are a "not", then better run away from this one. Tom



[Log in to Reply]  [No Email]
Charles (in GA)

04-28-2007 18:37:46




Report to Moderator
 Re: Steel Building Value in reply to Tim B from MA, 04-28-2007 09:43:48  
Check with your local building inspection and permit office. You need to know what wind loads, and snow loads the building must be rated for, and possibly some other factors. Then you need to determine if the building comes with engineering drawings (if the local inspectors require such) and that they show and specify that the building meets at least the minimum specs required by the building inspection office. If you cannot prove that the building is acceptable to the locals, it is of no use to you.

Charles

[Log in to Reply]  [No Email]
37WC

04-28-2007 17:10:43




Report to Moderator
 Re: Steel Building Value in reply to Tim B from MA, 04-28-2007 09:43:48  
As a past insurance claims adjuster, I have seen many buildings go down because the owner tried to get by, and not have the structrual strength built into his buildings for their area. You have to build for the worst possible condition and then you are prepared for the worst. Check with your insurance company if they have recommendations. They will be liable for the building if the "worst" happens. Best to you, from Minnesota.

[Log in to Reply]  [No Email]
Wardner

04-28-2007 11:53:24




Report to Moderator
 Re: Steel Building Value in reply to Tim B from MA, 04-28-2007 09:43:48  
I have never been in the market for a steel building so I can't comment on the price.

Of the four designs from American Steelspan, the "P" model would seem to be the best for New England. I saw a two year old arched building north of Bethel, VT that had collapsed from an uneven snow load. The snow had drifted to one side and caved in the 8" or 10" corregated sheets. The unloaded areas were also stretched from the collapse. It looked like the building was a total loss. I don't recall who manufactured it. I do know that the manufacturer did not replace it. The building housed part of a one-man tractor salvage operation and the owner was forced to sell out within a year.

You should look at warrantees and talk to others who have purchased similar buildings in MA. The company should have a list of owners.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy