|
Hi Guys, Well I'm doing ok health wise for what I'm currently doing, building a new house/shop/well. What little labor I'm excerting is about my maximum that I'm able to do at this time. If I do the home projects, then I'm shot for making any serious posts on Ytmag, as I can't do both at the same time, labor makes pain and pain doesn't let me think. The level of knowledge on welding from the users has greatly increased on Ytmag over the years. You guys got to remember, I've been retired for 15yrs and alot of the info I had on the top of my head, I'm now sitting on, so when I see a thread I can contribute too, (like the electrode discussions of late) I would have to spend along time doing my research in my text refference to post accurate info. I just don't have the time as I explained above. If all goes well, I'll post more often later on in the summer as were trying to head for the high country to get out of the summer heat. Thanks for asking. BTW, we hit water at 185ft and again at 295ft and stopped at 340ft. Using rotoray/air with foam and when we hit water, the water shot out a 8inch discharge pipe for 60ft. Acutal drilling time, 10hrs thru decomposed granite rock. Another unfinished project, no pump. lol T_Bone
|