Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Drill press

Welcome Guest, Log in or Register
Author 
MF294-4

04-13-2007 18:37:03




Report to Moderator

Went to use my drill press the other night and the chuck,spindle would not move more than quarter of an inch. Thought I had a tooth broken on the shaft. Took it apart and the mice had it full of Decon. Can't imagine how they got it up in there.




[Log in to Reply]   [No Email]
msb

04-14-2007 08:45:53




Report to Moderator
 Re: Drill press in reply to MF294-4, 04-13-2007 18:37:03  
Could be voles instead of mice. Voles are fascinating little tailless mouselike creatures. They live in colonies,sometimes migrate and are constantly stashing food in some of the strangest places. Decon doesn"t seem to kill them for some reason.



[Log in to Reply]  [No Email]
Billy NY

04-14-2007 14:33:59




Report to Moderator
 Re: Drill press in reply to msb, 04-14-2007 08:45:53  
Yeah those voles are fascinating, I had found the young ones before they opened their eyes, under a railroad tie bordering my garden, then caught mamma and papa vole, put em in a aquarium, she raised em, friendly little squeakers, she did not want the papa around whil'st raising the young, she'd come right out and attack him, all was well once the young opened their eyes. Everyone kind of got a laugh seeing this vole display in my garage.

[Log in to Reply]  [No Email]
Jim in N M

04-14-2007 08:18:18




Report to Moderator
 Re: Drill press in reply to MF294-4, 04-13-2007 18:37:03  
I went to change the air cleaner on my Chysler van and the compartment was full of yellow house insulation, funny thing was I didn't have any insulation around my place like that! jim in N M



[Log in to Reply]  [No Email]
Billy NY

04-14-2007 05:06:54




Report to Moderator
 Re: Drill press in reply to MF294-4, 04-13-2007 18:37:03  
They drag that stuff into all kinds of places unknown, and even after you stop putting it out, they will find it for years. The problem with it is they die off in the walls, find them running in circles for days, in your toolbox tray, and poison is dispersed throughout your home. I have no problem killing em or getting rid of them, but that poison is a joke, not only tortures the darned things, then they stink up your house cause you can't find them when dead, or they jamb up your drill, that is a bizarre one. The old traps are the best, no poison, and you find the kill.

I recently found a pile of sunflower seed in a manifold on the bench, like a heaping full measuring cup of it, the seed was in a bin on the other side of the cellar, must have left it next to something they could climb, picked up the manifold and hit the jackpot as it poured out. Hard to imagine how many trips it took to make a pile like that.

[Log in to Reply]  [No Email]
Steve Crum

04-14-2007 04:54:51




Report to Moderator
 Re: Drill press in reply to MF294-4, 04-13-2007 18:37:03  
Absolutely incredible what those varmints can get away with. I've found new nests in the top of a closed and locked tool box I had used the night before, To nests on the live line leg connections in a 400 amp 480 volt motor starter panel. Don't even want to talk about all the tractor and vehicle wiring harness's I've found knawed on or destroyed.



[Log in to Reply]  [No Email]
Joe(TX)

04-14-2007 03:53:30




Report to Moderator
 Re: Drill press in reply to MF294-4, 04-13-2007 18:37:03  
Went to put one of my boots on and found the mice had filled the toe with chocolate they had unwrapped.



[Log in to Reply]  [No Email]
Don-Wi

04-14-2007 12:31:05




Report to Moderator
 Re: Drill press in reply to Joe(TX), 04-14-2007 03:53:30  
Those little basterds love chocolate!! A couple years ago I bought a bag of chocolate covered caramels and they found them in my tool box at work over night. Came back the next day and they left me just the caramel part, the chocolate was all gone. Little guys left the wrappers in nice tiny little shreds too...

Funny part was when i found a dead one and put it in a pile of sprockets on the packing bench near the office (I was put up to it by a co-worker) one of my boss's found it(the one who's deathly afraid of mice) and just paniced. Kinda funny watchin the reaction on his face... He never did find out who did it either, far as I'm aware...

Donovan from Wisconsin

[Log in to Reply]  [No Email]
Washing Machine..John,PA

04-13-2007 18:50:38




Report to Moderator
 Re: Drill press in reply to MF294-4, 04-13-2007 18:37:03  
About a year ago, I had a service call on a Maytag washing machine. Found the motor was packed full of Decone. Interesting how mice know what to do. (Grin)



[Log in to Reply]  [No Email]
old art

04-13-2007 19:41:23




Report to Moderator
 Re: Drill press in reply to Washing Machine..John,PA, 04-13-2007 18:50:38  
they got ir right. don't get mad get even!!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy