Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Fencing

Welcome Guest, Log in or Register
Author 
jimdril

03-25-2007 17:47:19




Report to Moderator

I"m going to replace my garden fence with some 16" hog panels. My question is do I butt the panels on the wood posts, or do I overlap the ends?




[Log in to Reply]   [No Email]
souNdguy

03-26-2007 05:28:02




Report to Moderator
 Re: Fencing in reply to jimdril, 03-25-2007 17:47:19  
I use 16' hog panels on my hog pen. I put a hood post every 8 feet, I but the metal panels together and use a staple that is wide enough to drive completely in witht he two wires side by side. I always like to end a panel at a post. in a few rare cases i need a couple feet more to make a turn or a gate, I did overlap the panels 2-3 squares, and then used fence brace wire to weave them.

If you are using metal t-post.. i would think you will have to overlap the panels, and wire them together for strength... especially if you are planning on keeping hogs out of the garden..

Soundguy

Soundguy

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy