Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tool Talk Discussion Forum

old torque wrench

Welcome Guest, Log in or Register
Author 
lynnusdad

03-13-2007 15:58:39




Report to Moderator

I have 2 OLD torque wrenches. An Apco Mossberg & a Snap-on. Are these worth anything? Restoring, selling or keeping? Any info. would help.




[Log in to Reply]   [No Email]
J Schwiebert

03-13-2007 16:16:40




Report to Moderator
 Re: old torque wrench in reply to lynnusdad, 03-13-2007 15:58:39  
What size is the Mossberg? I have one too and it is a 600 foot pound model. They were made for the goverment or mine was. J.



[Log in to Reply]  [No Email]
lynnusdad

03-13-2007 16:35:15




Report to Moderator
 Re: old torque wrench in reply to J Schwiebert, 03-13-2007 16:16:40  
It's 175 foot pound, dial type. It has patent #'s on the tool & guage and a stock # on the back, but no year or model #.



[Log in to Reply]  [No Email]
IH2444

03-14-2007 13:06:00




Report to Moderator
 Re: old torque wrench in reply to lynnusdad, 03-13-2007 16:35:15  
I would compare them to a known good wrench and if they match on torque, use them.
torque a bolt to say 100 ft lbs with the good wrench then try the old one if it moves the bolt while showing just a slightly higher torque then it is good.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy