Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Welder question

Welcome Guest, Log in or Register
Author 
Ludwig

03-05-2007 11:43:57




Report to Moderator


So the time has come, we've been in the house 6 months, I'm ready to buy a welder.

I've got a $50 gift card for Sears, I think if I dig around I might even have another one or a Mall gift cert which might take the hurt out a bit more, so ideally I'll be buying this from Sears. I know not the best but you get why...

I want something mostly for sheetmetal type welding. Making/fixing a snowmobile muffler, welding up some holes in the truck, making a little yard art, that sort of stuff. Budget maxes out at $300 and even for that I'll have to wait until the end of the month when I get my pager pay.

Stick welders are wicked cheap but I think I want the ease of a MIG outfit.

So Sears has a Lincoln Handy MIG for $299 which seems like it'll do everything I want, it comes with both solid and flux wire. I figure to play with flux wire first but its nice to have the option of gas. At some point I'll probably be smart and take a class so I'm not just wasteing wire the rest of my life but I figure with the manual and some other books I can at least get started.

Any ideas/suggestions/BTDT?

[Log in to Reply]   [No Email]
1941 farmall a boy

03-06-2007 19:56:14




Report to Moderator
 Re: Welder question in reply to Ludwig, 03-05-2007 11:43:57  
Look on ebay I got one for my birthday and it is a mig flux wire welder it has 120 amps. You wont have to have any gas. My welder is a speedway series. It ran about 130 bucks shipping and all. I use it on my truck and I make some things with it. It can also weld aluminum which is good on my canoe when I knock a hole in it.

Carson



[Log in to Reply]  [No Email]
jhill52

03-05-2007 20:13:59




Report to Moderator
 Re: Welder question in reply to Ludwig, 03-05-2007 11:43:57  
I have a Lincoln SP-100 which is an older version of what you are looking at. I use mine for the kinds of things you want to do. I am very happy with it. I use flux core wire as well.



[Log in to Reply]  [No Email]
MarkB_MI

03-05-2007 19:51:41




Report to Moderator
 Re: Welder question in reply to Ludwig, 03-05-2007 11:43:57  
If you don't already have an oxyacetylene torch rig, make that your first purchase. You can gas weld the light stuff, and the torch can do a lot of things a welder can't (such as loosen stuck bolts).

If you've got the torch rig, then a MIG welder would be next on the list. A 220V MIG welder is a lot more versatile than a 110V rig.



[Log in to Reply]  [No Email]
mj

03-05-2007 15:58:43




Report to Moderator
 Re: Welder question in reply to Ludwig, 03-05-2007 11:43:57  
The little Lincoln should work just right for what you want to do. You will be able to weld heavier pieces with the flux core than when you're running gas because of the cooling effect of the gas shield. I use flux core for nearly everything except touchy stuff like chrome-
moly tubing, car bodies and something I want to look really good.



[Log in to Reply]  [No Email]
135 Fan

03-05-2007 16:46:45




Report to Moderator
 Re: Welder question in reply to mj, 03-05-2007 15:58:43  
You must be using an awful lot of shielding gas if it cools the weld that much. Solid wire with gas shielding will produce a consistantly good weld if the machine is set up right. Flux core can have problems for no apparent reason. This is a small amperage home owner welder. The self shielded flux core wire for them is not as strong as gas shielded solid wire (MIG). The MIG runs on reverse polarity and the flux core runs on straight polarity. Keep this in mind if you use both. Other flux core wires both self and gas shielded will run on reverse polarity. Mig is used for root passes on pressure vessels and piping. While occasionally gas shielded flux core is used on vessels, most codes don't allow for its use. The self shielded flux core (Innershield (Lincoln)) will work outside while any flux core or solid wire with gas shielding will not. Lincoln is a good name and most of their stuff is pretty good but not all of it. I'd pay a little more for it than some less common brand. Maybe you could go somewhere to try it out first? Hope this helps. Dave

[Log in to Reply]  [No Email]
mj

03-06-2007 06:51:32




Report to Moderator
 Re: Welder question in reply to 135 Fan, 03-05-2007 16:46:45  
Been there, done all that. Thanks anyway.



[Log in to Reply]  [No Email]
cb in wisc

03-05-2007 12:58:02




Report to Moderator
 Re: Welder question in reply to Ludwig, 03-05-2007 11:43:57  
Here at work we have a lincolin machine and at home I have a miller. I have to say that I like the Lincolin better than the Miller. Both machines have flux-core wire in them.



[Log in to Reply]  [No Email]
Greg_Ky

03-05-2007 12:21:52




Report to Moderator
 Re: Welder question in reply to Ludwig, 03-05-2007 11:43:57  
For mainly sheet metal work I would use .023 70s6 solid wire with 75/25 argon/c02 gas mix. For the occasional user that machine will be fine. Just remember the 75/25 cylinder is a high pressure and they start around $80 for a small one. Once you use the solid wire with gas you will be amazed at what you can do. Good luck and have fun.



[Log in to Reply]  [No Email]
Forgot to Mention

03-05-2007 12:25:19




Report to Moderator
 Re: Welder question in reply to Greg_Ky, 03-05-2007 12:21:52  
The gas cylinder will be refillable.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy