Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tool Talk Discussion Forum

Tool Cabinets

Welcome Guest, Log in or Register
Author 
JoeK(WI)

03-04-2007 08:38:08




Report to Moderator

No Brand War puhleez :)
Years back I bought a mid size(28"?) inexpensive Stack On brand roller cabinet,mid box,and 10 drawer top box.I have been completely satisfied with them for nearly 20yrs even though they are not as beefy/fancy as the high $$ cabs.Would like to buy more,maybe a full duplicate set but "Stack-On" no longer builds these(now hand boxes and gunsafes).Anyone know of anyplace that might have NOS Stack Ons,decent trade-ins or another Co making DECENT,serviceable,inexpensive units,above the cheap tin imports in quality and FAR below the megabucks the big names demand? I know it's been 20 yrs but the whole tower(3 individual units)only set me back about $200 then.

[Log in to Reply]   [No Email]
chvet73

03-05-2007 08:02:47




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
I"ve had my Sears cabinets for almost 30 years. They have been great products.



[Log in to Reply]  [No Email]
Ryan - WI

03-04-2007 20:18:48




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
Sam's offers the same stainless box everyone is talking about for 600 bucks. If I could justify the need for all the space I would buy one myself. The drawers are like silk.



[Log in to Reply]  [No Email]
R.J.

03-04-2007 19:10:00




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
Check the local auctions, ie farm auctions, estate auctions have seen some good ones sell. I bought one for hundred it not pretty but nice unit.

R.J.



[Log in to Reply]  [No Email]
bob 7

03-04-2007 18:20:33




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
Waterloo and Kennedy come out of same factory. I bought 2 sets of Kolbalt and like them I gave one srt to sonthese are with roller bearing drawers



[Log in to Reply]  [No Email]
city farmer

03-04-2007 18:04:05




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
don't know where you are located but if you have a costco near you they carrier a ss box that is very good at a reasonable price check for it online maybe it is one there also i know a lot of airplane mech that by and use these



[Log in to Reply]  [No Email]
jhill52

03-04-2007 15:21:59




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
I have a Remline that is a decent toolbox and price is good.



[Log in to Reply]  [No Email]
Steve Crum

03-04-2007 13:54:58




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
A good place to start is to call the Mac or Snap-on man. A lot of times these guys take tool boxes and roll a ways in on trade (or repo) and sell them for well less than their original value.
I've looked at the Kobalt boxes at Lowes also, these are pretty nice. The local Lowes has a nice stainless roll a way combo for about $600. Showed it to Mama at Christmas time, she said 'yea right', (she wasn't kidding). I did get some new socks and underpants though, so all is not lost.

[Log in to Reply]  [No Email]
ShepFL

03-04-2007 11:05:40




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
Check out ebay. I got a couple of nice Kennedy boxes for pennies on the dollar of original cost.



[Log in to Reply]  [No Email]
CRUSADER

03-04-2007 10:41:40




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
Try looking on ebay or Sears. They have some decent boxes. Also the Kobalt brand looks pretty good and isn't too overly exensive.

Jim



[Log in to Reply]  [No Email]
Midwest redneck

03-04-2007 10:30:32




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
Go on Ebay and type in Tool cabinets or tool chest and you will see all the stuff that pops up. A lot of the Gerstner wood machinist chests go for $300-500 (and are in real good condition), and they are $800 to 1200 new. You should be able to get a roll around cabinet for about 1/2-2/3rds of a new one. Also check your local paper classified ads, guys sometimes sell their stuff due to layoffs, needs extra cash.

[Log in to Reply]  [No Email]
ALAND

03-04-2007 09:12:35




Report to Moderator
 Re: Tool Cabinets in reply to JoeK(WI), 03-04-2007 08:38:08  
You might try Waterloo brand. I don't own one but know a few guys who do and I would say they are comprarable to stack-on. J&L lists a 15-drawer combination for $382.60.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy